Burris™ Zee Rings 1" Quick Detach Weaver-Style Rings Matte Black - Medium & High Base
Quick detach 1" scope rings fit Weaver style rails
Steel rings feature a pivoting insert (Medium & High Base)
The Burris™ Zee Rings are a revolutionary, Signature-designed Scope Rings that ensure stress-free, scratch-free mounting, provide tremendous gripping power and produce consistent shot accuracy. These matte black, steel rings include a pivoting synthetic insert that increases the scope-to-ring mounting surface while protecting the scope finish.
These matte black, 1-inch, Quick Detach Weaver Style Scope Rings comes in high or medium base, and come with all the necessary mounting hardware included for installation. Additional Pos-Align Offset Inserts can be purchased separately to replace the standard inserts supplied, for correcting any misalignment of receiver holes or rings, and for providing additional windage and elevation adjustment in any direction. This Offset Insert option is available in .005”, .010” and .020” offset distances.
Offset inserts have the center opening offset by the amount of distance shown in the description. For example, .005" offset inserts will move the scope tube .005" toward the thinner of the two inserts. The inserts can be used to move the scope tube in the front ring, the rear ring or both rings. The inserts may also be used in any combination as long as the matched halves stay together. A set of .005" inserts may be used in the front ring and .010" inserts in the rear, or whatever combination is needed. If the inserts are used to move the front of the scope tube to the right, the point of impact at 100 yards will move to the left approximately 5 inches. If the scope tube is moved in the rear ring to the right, the point of impact will move to the right.