The Traditions® Vortek StrikerFire™ VAPR™ Muzzleloader Rifle takes in-line muzzleloaders to the next level by removing the need for an external hammer and replacing it with an internal StrikerFire™ System. The StrikerFire works on the same principle as modern center-fire rifle safeties. To cock the gun, simply slide the striker button forward until it locks, then fire. The recessed de-cocking button allows for quick and quiet de-cocking of the firearm. The gun also comes equipped with an automatic de-cocking mechanism, so when the gun is opened, it is automatically de-cocked. By eliminating the external hammer you get faster lock times, plus the ability to mount your scope closer to the bore allows the gun to operate with less weight. Traditions™ equipped the StrikerFire™ with some additional features. The StrikerFire™ is outfitted with a two-stage trigger that is set at 3 pounds and is creep free. The innovative stock design makes the rifle lighter than any other rifle in its class while still maintaining maximum strength and durability. The Strikerfire VAPR™ model comes with a 1:24" fast twist barrel which is designed to properly stabilize modern high-BC muzzleloading bullets. The StrikerFire™ also features a premium CeraKote™ finish, Realtree™ Edge Camo stock, one-piece Accelerator Breech Plug™ that allows you to fire both loose or pelletized powder without changing the breech plug, a Dual Safety System, and Speed Load System that enables easier loading and more consistent groupings.

The Traditions® Vortek StrikerFire VAPR™ LDR Muzzleloader takes in-line muzzleloaders to the next level by removing the need for an external hammer and replacing it with an internal StrikerFire™ System. The StrikerFire™ System works on the same principle as modern center-fire rifle safeties. To cock the gun, simply slide the striker button forward until it locks, then fire. The recessed de-cocking button allows for quick and quiet de-cocking of the firearm. The gun also comes equipped with an automatic de-cocking mechanism, so when the gun is opened, it is automatically de-cocked. By eliminating the external hammer you get faster lock times, plus the ability to mount your scope closer to the bore allows the gun to operate with less weight. The Traditions™ VAPR LDR Muzzleloader Rifle features a Cerakote™ treated steel barrel that makes the rifle almost corrosion proof. The Vortek VAPR™ LDR Muzzleloader comes with a fast twist 1:24 rifled barrel, allowing this gun to properly stabilize today's modern high BC black powder bullets. Traditions™ equipped the Nitride StrikerFire™ LDR with some additional features. The StrikerFire™ is outfitted with a TAC2™ two-stage trigger that is set at 2 pounds and is creep free. The innovative stock design makes the rifle lighter than any other rifle in its class while still maintaining maximum strength and durability. The StrikerFire™ LDR also features a premium Soft-Touch Realtree™ Edge Camo stock, one-piece Accelerator Breech Plug™ that allows you to fire both loose or pelletized powder without changing the breech plug, a Dual Safety System, and Speed Load System that enables easier loading and more consistent groupings. Additionally, Traditions® has equipped this model with rugged, aircraft-grade aluminum, fiber optic open sights for excellent target acquisition in low light hunting scenarios.

The Traditions® Vortek StrikerFire VAPR™ LDR Muzzleloader takes in-line muzzleloaders to the next level by removing the need for an external hammer and replacing it with an internal StrikerFire™ System. The StrikerFire™ System works on the same principle as modern center-fire rifle safeties. To cock the gun, simply slide the striker button forward until it locks, then fire. The recessed de-cocking button allows for quick and quiet de-cocking of the firearm. The gun also comes equipped with an automatic de-cocking mechanism, so when the gun is opened, it is automatically de-cocked. By eliminating the external hammer you get faster lock times, plus the ability to mount your scope closer to the bore allows the gun to operate with less weight. The Traditions™ VAPR LDR Muzzleloader Rifle features a Cerakote™ treated steel barrel that makes the rifle almost corrosion proof. The Vortek VAPR™ LDR Muzzleloader comes with a fast twist 1:24 rifled barrel, allowing this gun to properly stabilize today's modern high BC black powder bullets. Traditions™ equipped the Nitride StrikerFire™ LDR with some additional features. The StrikerFire™ is outfitted with a TAC2™ two-stage trigger that is set at 2 pounds and is creep free. The innovative stock design makes the rifle lighter than any other rifle in its class while still maintaining maximum strength and durability. The StrikerFire™ LDR also features a premium Soft-Touch Realtree™ Edge Camo stock, one-piece Accelerator Breech Plug™ that allows you to fire both loose or pelletized powder without changing the breech plug, a Dual Safety System, and Speed Load System that enables easier loading and more consistent groupings.

The Traditions® Vortek Strikerfire VAPR™ Muzzleloader Package comes with a Traditions™ 3-9x40mm Scope. The Vortek StrikerFire™ VAPR takes in-line muzzleloaders to the next level by removing the need for an external hammer and replacing it with an internal StrikerFire™ System. The Strikerfire VAPR™ muzzleloader comes with a 1:24" fast twist barrel that is engineered to properly stabilize the high BC muzzleloading bullets used in many modern muzzleloaders. The StrikerFire™ system works on the same principle as modern center-fire rifle safeties. To cock the gun, simply slide the striker button forward until it locks, then fire. The recessed de-cocking button allows for quick and quiet de-cocking of the firearm. The gun also comes equipped with an automatic de-cocking mechanism, so when the gun is opened, it is automatically de-cocked. By eliminating the external hammer you get faster lock times, plus the ability to mount your scope closer to the bore allows the gun to operate with less weight. Traditions® equipped the StrikerFire™ with some additional features. The StrikerFire™ is outfitted with a TAC2™ two-stage trigger that is set at 2 pounds and is creep free. The StrikerFire™ also features a premium Cerakote™ finish, matte black stock, one-piece Accelerator Breech Plug™ that allows you to fire both loose or pelletized powder without changing the breech plug, a Dual Safety System, and Speed Load System that enables easier loading and more consistent groupings.

The Traditions® NitroFire VAPR™ Muzzleloader is a completely new and revolutionary gun. This muzzleloader utilizes the Federal® FireStick™ system, which takes the guesswork out of muzzleloading, and increases safety and simplicity. The NitroFire muzzleloader is a great gun for beginners and experienced shooters alike. This .50 caliber muzzleloader one of the easiest to load, requires the least equipment and accessories, and is incredibly accurate. This Traditions™ NitroFire VAPR Muzzleloader features a black synthetic stock, with a 26” fluted chromoly barrel with a silver CeraKote™ finish. The barrel is drilled and tapped for both open sights and scope mounts for convenience and compliance with all state laws. The Nitrofire VAPR™ Muzzleloader comes with a 1:24" fast twist barrel that is engineered to properly stabilize the high BC muzzleloading bullets used in many modern muzzleloaders. As with many Traditions muzzleloaders, the NitroFire VAPR features a trigger safety, as well as a hammer safety, allowing for a dual safety system. Additionally these guns come equipped with the Elite XT™ trigger system, which provides better accuracy and consistency for all shooters. This gun is built to be lightweight, maneuverable, accurate, and safe. The barrel of the Nitrofire™ VAPR is where all of the patented technology is held. The breech of the NitroFire is built to only accept the Federal™ Firestick, while still only allowing the bullet to be loaded from the muzzle. One of the best things about this muzzleloader is the complete removal of a breech plug of any kind. This dramatically reduces cleaning, as well as reducing the possibility of hangfires or misfires. The breech of the NitroFire allows for the use of the FireStick, but has a shelf that the bullet rests on, which allows for confident and easy loading. The Federal™ FireStick is a vital component to this groundbreaking new muzzleloader. The FireStick is a plastic capsule that holds pre-measured powder charges. The ability to have identical charges on every shot allows for a more consistent velocity spread, which increases accuracy and dependability. Since the FireSticks are only used once, there is no real cleaning involved in the breech area, which speeds up reloading as well. The new technology in the Traditions NitroFire reduces the need for many common accessories, which makes it much easier for beginners to get into the sport. Powder measures, powder flasks, nipple picks, speed loaders, cappers, parts soakers, and granular or pelletized powders are not needed with this muzzleloader, which can save hunters lots of money when they are first getting into muzzleloading. With this new muzzleloader, all you’ll need to carry in the field are a couple of primers, bullets, FireSticks, and a bullet starter! The Traditions™ NitroFire VAPR is a great muzzleloader for the casual muzzleloading enthusiast. With this muzzleloader, all you’ll need is to choose your preferred scope or sights, grab some Federal FireSticks, bullets, and primers, and head to the range!

The CVA™ Crossfire Muzzleloader is a revolutionary black powder rifle. This muzzleloader utilizes the Federal® FireStick™ system, which takes the guesswork out of muzzleloading, and increases safety and simplicity. The Crossfire™ muzzleloader is a great gun for beginners and experienced shooters alike. The CVA™ Crossfire muzzleloader is the first CVA muzzleloader to incorporate the Federal® FireStick™ charge system. Built on the Optima V2 muzzleloader frame, the .50 Cal CVA™ Crossfire is a compact and lightweight muzzleloader that is easy to clean and maintain. The FireStick™ technology is great for beginners, casual hunters and shooters that want an easy to use, low-maintenance muzzleloader. The Crossfire™ Muzzleloader is equipped with a 26” stainless steel fluted barrel which features a Nitride coating as well as the added protection of CeraKote™ on the exterior. The CVA™ Crossfire is easy to maneuver in the tree stand or in tight spots and comfortable to carry in the mountains. The Crossfire comes standard with a DuraSight® DEAD-ON™ one-piece scope mount and CVA’s solid aluminum PalmSaver Ramrod. This model features a Patriot Brown Cerakote™ barrel finish and Realtree™ Edge camo stock. When compared to its competitors, the CVA™ Crossfire Muzzleloader includes many features you won’t find anywhere else for the price. The Federal™ FireStick is a sealed polymer ignition capsule that holds premeasured powder charges. The ability to have the same exact charge on every shot allows for more consistent velocities, which increase accuracy and performance. Cleaning is a snap, since the FireStick™ is designed for one-time use there is no real cleaning involved in the breech area. The Firestick™ not only speeds up reloading, it also reduces the need for many common muzzleloader accessories, making it much easier for beginners. Powder measures, powder flasks, nipple picks, speed loaders, cappers, and parts soakers are not needed with this rifle. With the Crossfire™ Muzzleloader all you’ll need to carry are 209 primers, bullets, FireStick’s and short starter! The CVA™ Crossfire Muzzleloader is a great option for the hunter or shooter looking for convenience and safety. The Crossfire's ability to quickly remove the charge and know the loading status at any time is a great safety feature, inviting new muzzleloader shooters to get into our sport!

The Traditions® NitroFire™ VAPR Muzzleloader Rifle is a completely new and revolutionary gun. This muzzleloader utilizes the Federal® FireStick™ system, which takes the guesswork out of muzzleloading, and increases safety and simplicity. The NitroFire muzzleloader is a great gun for beginners and experienced shooters alike. This .50 caliber muzzleloader is one of the easiest to load, requires the least equipment and accessories, and is incredibly accurate. This Traditions™ NitroFire VAPR muzzleloader features a Veil™ Alpine Camo synthetic stock, with a 26” fluted Chromoly barrel with a Sniper Grey CeraKote™ finish. The barrel is drilled and tapped for both open sights and scope mounts for convenience. As with many Traditions muzzleloaders, the NitroFire features a trigger safety, as well as a hammer safety, allowing for a dual safety system. Additionally, these guns come equipped with the Elite XT™ trigger system, which provides better accuracy and consistency for all shooters. This gun is built to be lightweight, maneuverable, accurate, and safe. The barrel of this new muzzleloader is where all of the patented technology is held. The breech of the NitroFire is built to only accept the Federal™ Firestick, while still only allowing the bullet to be loaded from the muzzle. One of the best things about this muzzleloader is the complete removal of a breech plug of any kind. This dramatically reduces cleaning, as well as reducing the possibility of hangfires or misfires. The breech of the NitroFire allows for the use of the FireStick, but has a shelf that the bullet rests on, which allows for confident and easy loading. The Federal™ FireStick is a vital component to this groundbreaking new muzzleloader. The FireStick is a plastic capsule that holds pre-measured powder charges. The ability to have identical charges on every shot allows for a more consistent velocity spread, which increases accuracy and dependability. Since the FireSticks are only used once, there is no real cleaning involved in the breech area, which speeds up reloading as well. The new technology in the Traditions NitroFire reduces the need for many common accessories, which makes it much easier for beginners to get into the sport. Powder measures, powder flasks, nipple picks, speed loaders, cappers, parts soakers, and granular or pelletized powders are not needed with this muzzleloader, which can save hunters lots of money when they are first getting into muzzleloading. With this new muzzleloader, all you’ll need to carry in the field are a couple primers, bullets, FireSticks, and a bullet starter! The Traditions™ NitroFire VAPR is a great muzzleloader for casual muzzleloading enthusiast. With this muzzleloader, all you’ll need is to choose your preferred scope or sights, grab some Federal FireSticks, bullets, and primers, and head to the range!

The Traditions® NitroFire™ Pro Series VAPR Muzzleloader maintains all of the incredible features of the original NitroFire, but with some great upgrades! The New NitroFire Pro now features a new stock design with adjustable length of pull and an adjustable cheekpiece. Additionally the new pro series NitroFire features a threaded barrel so you can attach your favorite muzzle brake for a more enjoyable shooting experience. Each NitroFire Pro comes with a scope rail from the factory and is ready to be setup with the scope of your choice. This muzzleloader utilizes the Federal® FireStick™ system, which takes the guesswork out of muzzleloading, and increases safety and simplicity. The NitroFire Pro muzzleloader is a great gun for beginners and experienced shooters alike. This .50 caliber muzzleloader is one of the easiest to load, requires the least equipment and accessories, and is incredibly accurate. This Traditions™ NitroFire Pro VAPR muzzleloader features a black synthetic stock, with a 26” fluted Chromoly barrel with a Tungsten CeraKote™ finish. The barrel is drilled and tapped for both open sights and scope mounts for convenience. As with many Traditions muzzleloaders, the NitroFire Pro features a trigger safety, as well as a hammer safety, allowing for a dual safety system. Additionally, these guns come equipped with the Elite XT™ trigger system, which provides better accuracy and consistency for all shooters. This gun is built to be lightweight, maneuverable, accurate, and safe. The barrel of this new muzzleloader is where all of the patented technology is held. The breech of the NitroFire Pro is built to only accept the Federal™ Firestick, while still only allowing the bullet to be loaded from the muzzle. One of the best things about this muzzleloader is the complete removal of a breech plug of any kind. This dramatically reduces cleaning, as well as reducing the possibility of hangfires or misfires. The breech of the NitroFire Pro allows for the use of the FireStick, but has a shelf that the bullet rests on, which allows for confident and easy loading. The Federal™ FireStick is a vital component to this groundbreaking new muzzleloader. The FireStick is a plastic capsule that holds pre-measured powder charges. The ability to have identical charges on every shot allows for a more consistent velocity spread, which increases accuracy and dependability. Since the FireSticks are only used once, there is no real cleaning involved in the breech area, which speeds up reloading as well. The new technology in the Traditions NitroFire Pro reduces the need for many common accessories, which makes it much easier for beginners to get into the sport. Powder measures, powder flasks, nipple picks, speed loaders, cappers, parts soakers, and granular or pelletized powders are not needed with this muzzleloader, which can save hunters lots of money when they are first getting into muzzleloading. With this new muzzleloader, all you’ll need to carry in the field are a couple primers, bullets, FireSticks, and a bullet starter! The Traditions™ NitroFire Pro VAPR is a great muzzleloader for casual muzzleloading enthusiast. With this muzzleloader, all you’ll need is to choose your preferred scope or sights, grab some Federal FireSticks, bullets, and primers, and head to the range!

The Traditions® NitroFire™ VAPR muzzleloader is a completely new and revolutionary gun. This muzzleloader utilizes the Federal® FireStick™ system, which takes the guesswork out of muzzleloading, and increases safety and simplicity. The Nitrofire VAPR™ muzzleloader comes with a 1:24" fast twist barrel that is engineered to properly stabilize the high BC muzzleloading bullets used in many modern muzzleloaders. This .50 caliber muzzleloader is one of the easiest to load, requires the least equipment and accessories, and is incredibly accurate. This Traditions™ NitroFire VAPR muzzleloader features a Mossy Oak Break Up Country camo synthetic stock, with a 26” fluted chromoly barrel with a silver CeraKote™ finish. The barrel is drilled and tapped for both open sights and scope mounts for convenience and compliance with all state laws. As with many Traditions muzzleloaders, the NitroFire features a trigger safety, as well as a hammer safety, allowing for a dual safety system. Additionally these guns come equipped with the Elite XT™ trigger system, which provides better accuracy and consistency for all shooters. This gun is built to be lightweight, maneuverable, accurate, and safe. The barrel of this new muzzleloader is where all of the patented technology is held. The breech of the NitroFire is built to only accept the Federal Firestick, while still only allowing the bullet to be loaded from the muzzle. One of the best things about this muzzleloader is the complete removal of a breech plug of any kind. This dramatically reduces cleaning, as well as reducing the possibility of hangfires or misfires. The breech of the NitroFire allows for the use of the FireStick, but has a shelf that the bullet rests on, which allows for confident and easy loading. The Federal FireStick is a vital component to this groundbreaking new muzzleloader. The FireStick is a plastic capsule that holds pre-measured powder charges. The ability to have identical charges on every shot allows for a more consistent velocity spread, which increases accuracy and dependability. Since the FireSticks are only used once, there is no real cleaning involved in the breech area, which speeds up reloading as well. The new technology in the Traditions NitroFire reduces the need for many common accessories, which makes it much easier for beginners to get into the sport. Powder measures, powder flasks, nipple picks, speed loaders, cappers, parts soakers, and granular or pelletized powders are not needed with this muzzleloader, which can save hunters lots of money when they are first getting into muzzleloading. With this new muzzleloader, all you’ll need to carry in the field are a couple primers, bullet, FireSticks, and a bullet starter! The Traditions™ NitroFire VAPR is a great muzzleloader for the entry-level or casual muzzleloading enthusiast. With this muzzleloader, all you’ll need is to choose your preferred scope or sights, grab some Federal FireSticks, bullets, and primers, and head to the range!

The Traditions® NitroFire™ VAPR Muzzleloader Rifle is a completely new and revolutionary gun. This muzzleloader utilizes the Federal® FireStick™ system, which takes the guesswork out of muzzleloading, and increases safety and simplicity. The NitroFire muzzleloader is a great gun for beginners and experienced shooters alike. This .50 caliber muzzleloader is one of the easiest to load, requires the least equipment and accessories, and is incredibly accurate. This Traditions™ NitroFire VAPR muzzleloader features a Veil™ Wideland Camo synthetic stock, with a 26” fluted Chromoly barrel with a Burnt Bronze CeraKote™ finish. The barrel is drilled and tapped for both open sights and scope mounts for convenience and compliance with all state laws. As with many Traditions muzzleloaders, the NitroFire features a trigger safety, as well as a hammer safety, allowing for a dual safety system. Additionally, these guns come equipped with the Elite XT™ trigger system, which provides better accuracy and consistency for all shooters. This gun is built to be lightweight, maneuverable, accurate, and safe. The barrel of this new muzzleloader is where all of the patented technology is held. The breech of the NitroFire is built to only accept the Federal™ Firestick, while still only allowing the bullet to be loaded from the muzzle. One of the best things about this muzzleloader is the complete removal of a breech plug of any kind. This dramatically reduces cleaning, as well as reducing the possibility of hangfires or misfires. The breech of the NitroFire allows for the use of the FireStick, but has a shelf that the bullet rests on, which allows for confident and easy loading. The Federal™ FireStick is a vital component to this groundbreaking new muzzleloader. The FireStick is a plastic capsule that holds pre-measured powder charges. The ability to have identical charges on every shot allows for a more consistent velocity spread, which increases accuracy and dependability. Since the FireSticks are only used once, there is no real cleaning involved in the breech area, which speeds up reloading as well. The new technology in the Traditions NitroFire reduces the need for many common accessories, which makes it much easier for beginners to get into the sport. Powder measures, powder flasks, nipple picks, speed loaders, cappers, parts soakers, and granular or pelletized powders are not needed with this muzzleloader, which can save hunters lots of money when they are first getting into muzzleloading. With this new muzzleloader, all you’ll need to carry in the field are a couple primers, bullet, FireSticks, and a bullet starter! The Traditions™ NitroFire VAPR is a great muzzleloader for casual muzzleloading enthusiast. With this muzzleloader, all you’ll need is to choose your preferred scope or sights, grab some Federal FireSticks, bullets, and primers, and head to the range!

--> Built on one of Thompson Center Arms’ most popular design platforms, the Triumph Bone Collector Series has a look and feel all its own. From the styling of the stock to the advanced Weather Shield® corrosion resistant finish, the Triumph Bone Collector Series embodies the spirit of Michael Waddell and offers hunters a muzzleloader that is rugged, accurate and capable of handling magnum charges with ease. This Triumph Bone Collector has a durable, black composite FlexTech® stock and is equipped with four Energy Burners™ that have been placed at precise locations that allows the stock to compress slightly during recoil. This design is easy on the shooter’s shoulder and reduces felt recoil by 43 percent. The new Triumph Bone Collector Series features Thompson Center's patented Power Rod®, a solid aluminum ramrod with pivoting handle, and patent-pending Speed Breech® XT breech plug, which can be removed by hand for quick cleaning or unloading. The rifle comes complete with black traction grip panels on the forend, and black Weather Shield receivers and barrels to lock out corrosive elements, along with a distinct Bone Collector logo on the grip cap. The Triumph muzzleloader features a 28” fluted barrel with the QLA® muzzle system to aid in accuracy and loading. The barrel also features adjustable Fiber Optic sights, and is drilled and tapped for scope mounts. The Triumph Bone Collector™ is the most performance driven, innovative magnum muzzleloader on the market today. Wherever your adventure takes you, the Triumph Bone Collector™ will be there to help you take your next trophy.

The Traditions™ Vortek StrikerFire VAPR Muzzleloader Package comes with a Traditions™ 3-9x40mm Scope. The Traditions® StrikerFire™ VAPR Muzzleloader Rifle takes in-line muzzleloaders to the next level by removing the need for an external hammer and replacing it with an internal StrikerFire™ System. The StrikerFire works on the same principle as modern center-fire rifle safeties. To cock the gun, simply slide the striker button forward until it locks, then fire. The recessed de-cocking button allows for quick and quiet de-cocking of the firearm. The gun also comes equipped with an automatic de-cocking mechanism, so when the gun is opened, it is automatically de-cocked. By eliminating the external hammer you get faster lock times, plus the ability to mount your scope closer to the bore allows the gun to operate with less weight. Traditions™ equipped the StrikerFire™ with some additional features. The StrikerFire™ is outfitted with a two-stage trigger that is set at 3 pounds and is creep-free. The innovative stock design makes the rifle lighter than any other rifle in its class while still maintaining maximum strength and durability. The Strikerfire VAPR™ model comes with a 1:24" fast twist barrel which is designed to properly stabilize modern high-BC muzzleloading bullets. The StrikerFire™ also features a Premium Burnt Bronze CeraKote™ finish, Veil™ Wideland Camo stock, one-piece Accelerator Breech Plug™ that allows you to fire both loose or pelletized powder without changing the breech plug, a Dual Safety System, and Speed Load System that enables easier loading and more consistent groupings.

Built on one of Thompson Center Arms’ most popular design platforms, the Triumph Bone Collector Series has a look and feel all its own. From the styling of the stock to the advanced Weather Shield® corrosion resistant finish, the Triumph Bone Collector Series embodies the spirit of Michael Waddell and offers hunters a muzzleloader that is rugged, accurate and capable of handling magnum charges with ease. This Triumph Bone Collector has a composite stock in Realtree® AP® Camo. It features a FlexTech® stock and is equipped with four Energy Burners™ that have been placed at precise locations that allows the stock to compress slightly during recoil. This design is easy on the shooter’s shoulder and reduces felt recoil by 43 percent. The new Triumph Bone Collector Series features Thompson Center's patented Power Rod®, a solid aluminum ramrod with pivoting handle, and patent-pending Speed Breech® XT breech plug, which can be removed by hand for quick cleaning or unloading. The rifle comes complete with black traction grip panels on the forend, and camo Weather Shield receivers and camo barrels to lock out corrosive elements, along with a distinct Bone Collector logo on the grip cap. The Triumph muzzleloader features a 28” fluted barrel with the QLA® muzzle system to aid in accuracy and loading. The barrel also features adjustable Fiber Optic sights, and is drilled and tapped for scope mounts. The Triumph Bone Collector™ is the most performance driven, innovative magnum muzzleloader on the market today. Wherever your adventure takes you, the Triumph Bone Collector™ will be there to help you take your next trophy.

The CVA® Accura LR-X™ Muzzleloader is an upgraded version of the Accura LR (Long Range). The Accura™ LR-X muzzleloader carries over most of the features from the previous model with some serious upgrades to the stock, fit and finish, and long-range terminal performance. The .50 Caliber Accura LR-X Muzzleloader is the ultimate rifle for hunters wanting long-range performance and accuracy with increased BC bullets and muzzle velocities. The CVA™ Accura LR-X Long Range Muzzleloader features the new CVA X-Treme™ stock, which sports an adjustable comb to fit any shooter and their optics of choice. This new comb adjustment is inset in the stock to allow for ambidextrous use, as there is no protruding knob to worry about. Additionally, the inset screw will allow for the gun to have a streamlined and sleek look and feel. This new CVA stock features a Matte Black Soft-Touch™ stock for great grip in all conditions. Adjustable stocks are gaining popularity in the shooting community due to the ability to give a shooter a proper cheek weld to the stock, whether they are using open sights or scopes with various ring heights. The CVA Accura LR-X Rifle comes standard with the legendary Bergara™ barrel, which features a Nitride coating as well as the added protection of CeraKote™ FDE on the exterior. The .50 caliber barrel on this muzzleloader is 30” long, with a threaded muzzle to accept the new CVA™ Muzzle Brake, which is threaded ¾” x 24. To properly stabilize the high BC muzzleloading bullets used in this muzzleloader, the LR-X features a 1:28” twist rate. Borrowing technology from the Paramount, this new Accura LR-X will offer a free-floated barrel without an under-barrel ramrod. Instead, all new CVA Accura’s will ship with a carbon fiber collapsible ramrod. The CVA Accura LR-X comes with a Quake™ Claw Rifle Sling, Durasight® scope rail, accessory kit, Carbon fiber collapsible ramrod, and CVA Owner’s Manual. As with any CVA Accura™ Muzzleloader, there is an accuracy guarantee and a lifetime guarantee on manufacturer defects. If you have any questions about this muzzleloader, please feel free to contact our friendly and knowledgeable customer service team! Also, this gun is available on our custom packages page, where you can choose your gun, scope, rings, and case. We mount and bore sight all custom rifle combos!

--> With the great looks, quality and accuracy of the ever popular Encore Pro Hunter™, the new fixed-barrel muzzleloader combines the advanced features of the Pro Hunter rifle with Thompson Center’s solid reputation for durability and performance in the field. Unlike other muzzleloaders in its line, the Pro Hunter FX comes standard with a fixed .50 caliber barrel that is not interchangeable. Instead, the muzzleloader sports a 26-inch fluted barrel with patented QLA® (Quick Load Accurizer) for enhanced accuracy. Other notable features include the muzzleloader’s improved handling and recoil reduction system made possible by the FlexTech™ stock and forend. Inside the FlexTech stock, four Energy Burners™, along with the recoil pad, allowing the stock to compress slightly when fired, helping to reduce felt recoil by forty-two percent. Additionally the Pro Hunter FX muzzleloader includes the Speed Breech® 3, the latest in hand-removable, threaded breech plug technology. Unlike competitors' threaded breech plugs, the Speed Breech® 3's triple lead thread design gives it more area between the threads that helps prevent breech plug seizing from powder corrosion. The triple lead thread design equates to easier removal with fewer turns than conventional plugs. Removal and cleaning just got easier with Thompson Center's new Speed Breech 3. The ProHunter FX™ muzzleloader is drilled and tapped for scope mounts. It comes standard with Williams™ fiber optic sights, along with a Swing Hammer® that can be conveniently positioned toward either side of the frame, enabling easier access to the hammer under mounted scopes. Weighing in at just 7 pounds, the Pro Hunter FX measures 42.5 inches in length and features a 14-inch length of pull. This FX muzzleloader features a durable black composite stock. To protect the muzzleloader against inclement weather, Thompson Center has added its tough-as-nails finish, Weather Shield®. When applied to the barrel, receiver and other rifle critical parts, the Weather Shield coating adds an extra level of protection against corrosion, while extending the durability and life of the muzzleloader.

Built on one of Thompson Center Arms’ most popular design platforms, the Triumph Bone Collector Series has a look and feel all its own. From the styling of the stock to the advanced Weather Shield® corrosion resistant finish, the Triumph Bone Collector Series embodies the spirit of Michael Waddell and offers hunters a muzzleloader that is rugged, accurate and capable of handling magnum charges with ease. This Triumph Bone Collector has a composite stock in Realtree® AP® Camo. It features a FlexTech® stock and is equipped with four Energy Burners™ that have been placed at precise locations that allows the stock to compress slightly during recoil. This design is easy on the shooter’s shoulder and reduces felt recoil by 43 percent. The new Triumph Bone Collector Series features Thompson Center's patented Power Rod®, a solid aluminum ramrod with pivoting handle, and patent-pending Speed Breech® XT breech plug, which can be removed by hand for quick cleaning or unloading. The rifle comes complete with black traction grip panels on the forend, and black Weather Shield receivers and barrels to lock out corrosive elements, along with a distinct Bone Collector logo on the grip cap. The Triumph muzzleloader features a 28” fluted barrel with the QLA® muzzle system to aid in accuracy and loading. The barrel also features adjustable Fiber Optic sights, and is drilled and tapped for scope mounts. The Triumph Bone Collector™ is the most performance driven, innovative magnum muzzleloader on the market today. Wherever your adventure takes you, the Triumph Bone Collector™ will be there to help you take your next trophy.

--> Built on one of Thompson Center Arms’ most popular design platforms, the Triumph Bone Collector Series has a look and feel all its own. From the styling of the stock to the advanced Weather Shield® corrosion resistant finish, the Triumph Bone Collector Series embodies the spirit of Michael Waddell and offers hunters a muzzleloader that is rugged, accurate and capable of handling magnum charges with ease. This Triumph Bone Collector has a composite stock in Realtree® AP® Camo. It features a FlexTech® stock and is equipped with four Energy Burners™ that have been placed at precise locations that allows the stock to compress slightly during recoil. This design is easy on the shooter’s shoulder and reduces felt recoil by 43 percent. The new Triumph Bone Collector Series features Thompson Center's patented Power Rod®, a solid aluminum ramrod with pivoting handle, and patent-pending Speed Breech® XT breech plug, which can be removed by hand for quick cleaning or unloading. The rifle comes complete with black traction grip panels on the forend, and black Weather Shield receivers and barrels to lock out corrosive elements, along with a distinct Bone Collector logo on the grip cap. The Triumph muzzleloader features a 28” fluted barrel with the QLA® muzzle system to aid in accuracy and loading. The barrel also features adjustable Fiber Optic sights, and is drilled and tapped for scope mounts. The Triumph Bone Collector™ is the most performance driven, innovative magnum muzzleloader on the market today. Wherever your adventure takes you, the Triumph Bone Collector™ will be there to help you take your next trophy.

The CVA® Accura LR-X™ Muzzleloader is an upgraded version of the Accura LR (Long Range). The Accura™ LR-X muzzleloader carries over most of the features from the previous model with some serious upgrades to the stock, fit and finish, and long-range terminal performance. The .50 Caliber Accura LR-X Muzzleloader is the ultimate rifle for hunters wanting long-range performance and accuracy with increased BC bullets and muzzle velocities. The CVA™ Accura LR-X Long Range Muzzleloader features the new CVA X-Treme™ stock, which sports an adjustable comb to fit any shooter and their optics of choice. This new comb adjustment is inset in the stock to allow for ambidextrous use, as there is no protruding knob to worry about. Additionally, the inset screw will allow for the gun to have a streamlined and sleek look and feel. This new CVA stock features a Matte Black Soft-Touch™ stock for great grip in all conditions. Adjustable stocks are gaining popularity in the shooting community due to the ability to give a shooter a proper cheek weld to the stock, whether they are using open sights or scopes with various ring heights. The CVA Accura LR-X Rifle comes standard with the legendary Bergara™ barrel, which features a Nitride coating as well as the added protection of CeraKote™ FDE on the exterior. The .50 caliber barrel on this muzzleloader is 30” long, with a threaded muzzle to accept the new CVA™ Muzzle Brake, which is threaded ¾” x 24. To properly stabilize the high BC muzzleloading bullets used in this muzzleloader, the LR-X features a 1:28” twist rate. Borrowing technology from the Paramount, this new Accura LR-X will offer a free-floated barrel without an under-barrel ramrod. Instead, all new CVA Accura’s will ship with a carbon fiber collapsible ramrod. The CVA Accura LR-X comes with a Quake™ Claw Rifle Sling, Williams® fiber optics sights, accessory kit, carbon fiber collapsible ramrod, and CVA Owner’s Manual. As with any CVA Accura™ Muzzleloader, there is an accuracy guarantee and a lifetime guarantee on manufacturer defects. If you have any questions about this muzzleloader, please feel free to contact our friendly and knowledgeable customer service team! Also, this gun is available on our custom packages page, where you can choose your gun, scope, rings, and case. We mount and bore sight all custom rifle combos!

The .50 Caliber CVA Accura MR-X™ Muzzleloader is an upgraded version of the Accura MR. The Accura MR-X muzzleloader carries over most of the features from the previous model with some serious upgrades to the stock, fit and finish, and long-range terminal performance. The .50 Caliber Accura MR-X Muzzleloader is the ultimate rifle for hunters wanting a compact design with increased BC bullets and velocities. This gun is right at home chasing whitetails in the Eastern US, as well as climbing the mountains of the Western US for elk and mule deer. The CVA™ Accura MR-X Muzzleloader features the new CVA X-Treme stock, which sports an adjustable comb to fit any shooter and their optics of choice. This new comb adjustment is inset in the stock to allow for ambidextrous use, as there is no protruding knob to worry about. Additionally, the inset screw allows the gun to have a streamlined and sleek look and feel. This new CVA stock features True Timber™ Strata camo with a Soft-Touch™ finish for great grip in all conditions. Adjustable stocks are gaining popularity in the shooting community due to the ability to give a shooter a proper cheek weld to the stock, whether they are using open sights or scopes with various ring heights. The CVA Accura MR-X Rifle comes standard with the legendary Bergara™ barrel, which features a non-reflective matte finish on the exterior. The .50 caliber barrel on this muzzleloader is 26” long, with a threaded muzzle to accept the new CVA Paramount Muzzle Brake, which is threaded ¾” x 24. To properly stabilize the high BC muzzleloading bullets used in this muzzleloader, the MR-X features a 1:28” twist rate. Borrowing technology from the Paramount, this new Accura MR-X will offer a free-floated barrel without an under-barrel ramrod. Instead, all new CVA Accura’s will ship with a carbon fiber collapsible ramrod. The CVA Accura MR-X comes with a Quake™ Claw Sling, Durasight® scope rail, accessory kit, carbon fiber collapsible ramrod, and CVA Owner’s Manual. As with any CVA Accura Muzzleloader, there is an accuracy guarantee and a lifetime guarantee on manufacturer defects. If you have any questions about this muzzleloader, please feel free to contact our friendly and knowledgeable customer service team! Also, this gun is available on our custom packages page, where you can choose your gun, scope, rings, and case. We mount and bore sight all custom rifle combos!

The CVA Accura MR-X™ Muzzleloader is an upgraded version of the Accura MR. The .50 Caliber Accura MR-X Muzzleloader carries over most of the features from the previous model with some serious upgrades to the stock, fit and finish, and long-range terminal performance. The .50 Caliber Accura MR-X Muzzleloader is the ultimate rifle for hunters wanting a compact design with increased BC bullets and velocities. This gun is right at home chasing whitetails in the Eastern US, as well as climbing the mountains of the Western US for elk and mule deer. The CVA™ Accura MR-X Muzzleloader features the new CVA X-Treme stock, which sports an adjustable comb to fit any shooter and their optics of choice. This new comb adjustment is inset in the stock to allow for ambidextrous use, as there is no protruding knob to worry about. Additionally, the inset screw allows the gun to have a streamlined and sleek look and feel. This new CVA stock features Veil™ Alpine Camo, with a Soft-Touch™ finish for great grip in all conditions. Adjustable stocks are gaining popularity in the shooting community due to the ability to give a shooter a proper cheek weld to the stock, whether they are using open sights or scopes with various ring heights. The CVA Accura MR-X Rifle comes standard with the legendary Bergara™ barrel, which features a Nitride coating as well as the added protection of CeraKote™ on the exterior. The .50 caliber barrel on this muzzleloader is 26” long, with a threaded muzzle to accept the new Paramount Muzzle Brake, which is threaded ¾” x 24. To properly stabilize the high BC muzzleloading bullets used in this muzzleloader, the MR-X features a 1:28” twist rate. Borrowing technology from the Paramount, this new Accura MR-X will offer a free-floated barrel without an under-barrel ramrod. Instead, all new CVA Accura’s will ship with a carbon fiber collapsible ramrod. The CVA Accura MR-X comes with a Quake™ Claw Sling, Durasight® scope rail, accessory kit, carbon fiber collapsible ramrod, and CVA Owner’s Manual. As with any CVA Accura Muzzleloader, there is an accuracy guarantee and a lifetime guarantee on manufacturer defects. If you have any questions about this muzzleloader, please feel free to contact our friendly and knowledgeable customer service team! Also, this gun is available on our custom packages page, where you can choose your gun, scope, rings, and case. We mount and bore sight all custom rifle combos!