The CVA® Accura LR-X™ Muzzleloader is an upgraded version of the Accura LR (Long Range). The Accura™ LR-X muzzleloader carries over most of the features from the previous model with some serious upgrades to the stock, fit and finish, and long-range terminal performance. The .50 Caliber Accura LR-X Muzzleloader is the ultimate rifle for hunters wanting long-range performance and accuracy with increased BC bullets and muzzle velocities. The CVA™ Accura LR-X Long Range Muzzleloader features the new CVA X-Treme™ stock, which sports an adjustable comb to fit any shooter and their optics of choice. This new comb adjustment is inset in the stock to allow for ambidextrous use, as there is no protruding knob to worry about. Additionally, the inset screw will allow for the gun to have a streamlined and sleek look and feel. This new CVA stock features Realtree™ Hillside Camo, with a Soft-Touch™ finish for great grip in all conditions. Adjustable stocks are gaining popularity in the shooting community due to the ability to give a shooter a proper cheek weld to the stock, whether they are using open sights or scopes with various ring heights. The CVA Accura LR-X Rifle comes standard with the legendary Bergara™ barrel, which features a Nitride coating as well as the added protection of CeraKote™ Patriot Brown on the exterior. The .50 caliber barrel on this muzzleloader is 30” long, with a threaded muzzle to accept the new CVA™ Muzzle Brake, which is threaded ¾” x 24. To properly stabilize the high BC muzzleloading bullets used in this muzzleloader, the LR-X features a 1:28” twist rate. Borrowing technology from the Paramount, this new Accura LR-X will offer a free-floated barrel without an under-barrel ramrod. Instead, all new CVA Accura’s will ship with a carbon fiber collapsible ramrod. The CVA Accura LR-X comes with a Quake™ Claw Rifle Sling, Durasight® scope rail, accessory kit, Carbon fiber collapsible ramrod, and CVA Owner’s Manual. As with any CVA Accura™ Muzzleloader, there is an accuracy guarantee and a lifetime guarantee on manufacturer defects. If you have any questions about this muzzleloader, please feel free to contact our friendly and knowledgeable customer service team! Also, this gun is available on our custom packages page, where you can choose your gun, scope, rings, and case. We mount and bore sight all custom rifle combos!

The CVA® Accura LR-X™ Muzzleloader is an upgraded version of the Accura LR (Long Range). The Accura™ LR-X muzzleloader carries over most of the features from the previous model with some serious upgrades to the stock, fit and finish, and long-range terminal performance. The .45 Caliber Accura LR-X Muzzleloader is the ultimate rifle for hunters wanting long-range performance and accuracy with increased BC bullets and muzzle velocities. The CVA™ Accura LR-X Long Range Muzzleloader features the new CVA X-Treme™ stock, which sports an adjustable comb to fit any shooter and their optics of choice. This new comb adjustment is inset in the stock to allow for ambidextrous use, as there is no protruding knob to worry about. Additionally, the inset screw will allow for the gun to have a streamlined and sleek look and feel. This new CVA stock features a Matte Black Soft-Touch™ stock for great grip in all conditions. Adjustable stocks are gaining popularity in the shooting community due to the ability to give a shooter a proper cheek weld to the stock, whether they are using open sights or scopes with various ring heights. The CVA Accura LR-X Rifle comes standard with the legendary Bergara™ barrel, which features a Nitride coating as well as the added protection of CeraKote™ FDE on the exterior. The .45 caliber barrel on this muzzleloader is 30” long, with a threaded muzzle to accept the new CVA™ Muzzle Brake, which is threaded ¾” x 20. To properly stabilize the high BC muzzleloading bullets used in this muzzleloader, the LR-X features a 1:22” twist rate. Borrowing technology from the Paramount, this new Accura LR-X will offer a free-floated barrel without an under-barrel ramrod. Instead, all new CVA Accura’s will ship with a carbon fiber collapsible ramrod. The CVA Accura LR-X comes with a Quake™ Claw Rifle Sling, Durasight® scope rail, accessory kit, Carbon fiber collapsible ramrod, and CVA Owner’s Manual. As with any CVA Accura™ Muzzleloader, there is an accuracy guarantee and a lifetime guarantee on manufacturer defects. If you have any questions about this muzzleloader, please feel free to contact our friendly and knowledgeable customer service team! Also, this gun is available on our custom packages page, where you can choose your gun, scope, rings, and case. We mount and bore sight all custom rifle combos! **This rifle comes with a VariFlame ignition

With the great looks, quality, and accuracy of the ever popular Encore Pro Hunter™, the new fixed-barrel muzzleloader combines the advanced features of the Pro Hunter rifle with Thompson Center’s solid reputation for durability and performance in the field. Unlike other muzzleloaders in its line, the Pro Hunter FX comes standard with a fixed .50 caliber barrel that is not interchangeable. Instead, the muzzleloader sports a 26-inch fluted barrel with patented QLA® (Quick Load Accurizer) for enhanced accuracy. Other notable features include the muzzleloader’s improved handling and recoil reduction system made possible by the FlexTech™ stock and forend. Inside the FlexTech stock, four Energy Burners™, along with the recoil pad, allowing the stock to compress slightly when fired, helping to reduce felt recoil by forty-two percent. Additionally, the Pro Hunter FX muzzleloader includes the Speed Breech® 3, the latest in hand-removable, threaded breech plug technology. Unlike competitors' threaded breech plugs, the Speed Breech® 3's triple lead thread design gives it more area between the threads that help prevent breech plug seizing from powder corrosion. The triple lead thread design equates to easier removal with fewer turns than conventional plugs. Removal and cleaning just got easier with Thompson Center's new Speed Breech 3. The ProHunter FX™ muzzleloader is drilled and tapped for scope mounts. It comes standard with Williams™ fiber optic sights, along with a Swing Hammer® that can be conveniently positioned toward either side of the frame, enabling easier access to the hammer under mounted scopes. Weighing in at just 7 pounds, the Pro Hunter FX measures 42.5 inches in length and features a 14-inch length of pull. This FX muzzleloader features a durable Realtree® AP™ Camo stock. To protect the muzzleloader against inclement weather, Thompson Center has added its tough-as-nails finish, Weather Shield®. When applied to the barrel, receiver and other rifle critical parts, the Weather Shield coating adds an extra level of protection against corrosion, while extending the durability and life of the muzzleloader.

The Traditions® NitroFire™ Pro Series VAPR Muzzleloader maintains all of the incredible features of the original NitroFire, but with some great upgrades! The New NitroFire Pro now features a new stock design with adjustable length of pull and an adjustable cheekpiece. Additionally the new pro series NitroFire features a threaded barrel so you can attach your favorite muzzle brake for a more enjoyable shooting experience. Each NitroFire Pro comes with a scope rail from the factory and is ready to be setup with the scope of your choice. This muzzleloader utilizes the Federal® FireStick™ system, which takes the guesswork out of muzzleloading, and increases safety and simplicity. The NitroFire Pro muzzleloader is a great gun for beginners and experienced shooters alike. This .50 caliber muzzleloader is one of the easiest to load, requires the least equipment and accessories, and is incredibly accurate. This Traditions™ NitroFire Pro VAPR muzzleloader features a Veil™ Alpine Camo synthetic stock, with a 26” fluted Chromoly barrel with a Tungsten CeraKote™ finish. The barrel is drilled and tapped for both open sights and scope mounts for convenience. As with many Traditions muzzleloaders, the NitroFire Pro features a trigger safety, as well as a hammer safety, allowing for a dual safety system. Additionally, these guns come equipped with the Elite XT™ trigger system, which provides better accuracy and consistency for all shooters. This gun is built to be lightweight, maneuverable, accurate, and safe. The barrel of this new muzzleloader is where all of the patented technology is held. The breech of the NitroFire Pro is built to only accept the Federal™ Firestick, while still only allowing the bullet to be loaded from the muzzle. One of the best things about this muzzleloader is the complete removal of a breech plug of any kind. This dramatically reduces cleaning, as well as reducing the possibility of hangfires or misfires. The breech of the NitroFire Pro allows for the use of the FireStick, but has a shelf that the bullet rests on, which allows for confident and easy loading. The Federal™ FireStick is a vital component to this groundbreaking new muzzleloader. The FireStick is a plastic capsule that holds pre-measured powder charges. The ability to have identical charges on every shot allows for a more consistent velocity spread, which increases accuracy and dependability. Since the FireSticks are only used once, there is no real cleaning involved in the breech area, which speeds up reloading as well. The new technology in the Traditions NitroFire Pro reduces the need for many common accessories, which makes it much easier for beginners to get into the sport. Powder measures, powder flasks, nipple picks, speed loaders, cappers, parts soakers, and granular or pelletized powders are not needed with this muzzleloader, which can save hunters lots of money when they are first getting into muzzleloading. With this new muzzleloader, all you’ll need to carry in the field are a couple primers, bullets, FireSticks, and a bullet starter! The Traditions™ NitroFire Pro VAPR is a great muzzleloader for casual muzzleloading enthusiast. With this muzzleloader, all you’ll need is to choose your preferred scope or sights, grab some Federal FireSticks, bullets, and primers, and head to the range!

The CVA Accura MR-X™ Muzzleloader is an upgraded version of the Accura MR. The .45 Caliber Accura MR-X Muzzleloader carries over most of the features from the previous model with some serious upgrades to the stock, fit and finish, and long-range terminal performance. The .45 Caliber Accura MR-X Muzzleloader is the ultimate rifle for hunters wanting a compact design with increased BC bullets and velocities. This gun is right at home chasing whitetails in the Eastern US, as well as climbing the mountains of the Western US for elk and mule deer. The CVA™ Accura MR-X Muzzleloader features the new CVA X-Treme stock, which sports an adjustable comb to fit any shooter and their optics of choice. This new comb adjustment is inset in the stock to allow for ambidextrous use, as there is no protruding knob to worry about. Additionally, the inset screw will allow for the gun to have a streamlined and sleek look and feel. This new CVA stock features Veil™ Alpine Camo, with a Soft-Touch™ finish for great grip in all conditions. Adjustable stocks are gaining popularity in the shooting community due to the ability to give a shooter a proper cheek weld to the stock, whether they are using open sights or scopes with various ring heights. The CVA Accura MR-X Rifle comes standard with the legendary Bergara™ barrel, which features a Nitride coating as well as the added protection of CeraKote™ on the exterior. The .45 caliber barrel on this muzzleloader is 26” long, with a threaded muzzle to accept the new Paramount Muzzle Brake, which is threaded ¾” x 20. To properly stabilize the high BC muzzleloading bullets used in this muzzleloader, the MR-X features a 1:22” twist rate. Borrowing technology from the Paramount, this new Accura MR-X will offer a free-floated barrel without an under-barrel ramrod. Instead, all new CVA Accura’s will ship with a carbon fiber collapsible ramrod. The CVA Accura MR-X comes with a Quake™ Claw Sling, Durasight® scope rail, accessory kit, carbon fiber collapsible ramrod, and CVA Owner’s Manual. As with any CVA Accura Muzzleloader, there is an accuracy guarantee and a lifetime guarantee on manufacturer defects. If you have any questions about this muzzleloader, please feel free to contact our friendly and knowledgeable customer service team! Also, this gun is available on our custom packages page, where you can choose your gun, scope, rings, and case. We mount and bore sight all custom rifle combos! This model comes equipped with a 209 ignition from the factory, and also includes a Variflame breech plug and adapters so you can use either one!

The Traditions® NitroFire™ Pro Series VAPR Muzzleloader maintains all of the incredible features of the original NitroFire, but with some great upgrades! The New NitroFire Pro now features a new stock design with adjustable length of pull and an adjustable cheekpiece. Additionally the new pro series NitroFire features a threaded barrel so you can attach your favorite muzzle brake for a more enjoyable shooting experience. Each NitroFire Pro comes with a scope rail from the factory and is ready to be setup with the scope of your choice. The Traditions NitroFire™ Pro VAPR Scope Combo comes with a mounted and bore-sighted 3-9x40mm Traditions™ Duplex Muzzleloader Scope. The Traditions™ Scope is specifically designed for modern muzzleloaders. This scope is built to withstand the impact of today’s high-powered black powder rifles. The 3-9x40mm duplex reticle is unbreakable and the multi-coated optics are clear and bright. Each scope is covered by Traditions™ Lifetime Warranty, giving you years of quality performance at a great value. This muzzleloader utilizes the Federal® FireStick™ system, which takes the guesswork out of muzzleloading, and increases safety and simplicity. The NitroFire Pro muzzleloader is a great gun for beginners and experienced shooters alike. This .50 caliber muzzleloader is one of the easiest to load, requires the least equipment and accessories, and is incredibly accurate. This Traditions™ NitroFire Pro VAPR muzzleloader features a black synthetic stock, with a 26” fluted Chromoly barrel with a Tungsten CeraKote™ finish. The barrel is drilled and tapped for both open sights and scope mounts for convenience. As with many Traditions muzzleloaders, the NitroFire Pro features a trigger safety, as well as a hammer safety, allowing for a dual safety system. Additionally, these guns come equipped with the Elite XT™ trigger system, which provides better accuracy and consistency for all shooters. This gun is built to be lightweight, maneuverable, accurate, and safe. The barrel of this new muzzleloader is where all of the patented technology is held. The breech of the NitroFire Pro is built to only accept the Federal™ Firestick, while still only allowing the bullet to be loaded from the muzzle. One of the best things about this muzzleloader is the complete removal of a breech plug of any kind. This dramatically reduces cleaning, as well as reducing the possibility of hangfires or misfires. The breech of the NitroFire Pro allows for the use of the FireStick, but has a shelf that the bullet rests on, which allows for confident and easy loading. The Federal™ FireStick is a vital component to this groundbreaking new muzzleloader. The FireStick is a plastic capsule that holds pre-measured powder charges. The ability to have identical charges on every shot allows for a more consistent velocity spread, which increases accuracy and dependability. Since the FireSticks are only used once, there is no real cleaning involved in the breech area, which speeds up reloading as well. The new technology in the Traditions NitroFire Pro reduces the need for many common accessories, which makes it much easier for beginners to get into the sport. Powder measures, powder flasks, nipple picks, speed loaders, cappers, parts soakers, and granular or pelletized powders are not needed with this muzzleloader, which can save hunters lots of money when they are first getting into muzzleloading. With this new muzzleloader, all you’ll need to carry in the field are a couple primers, bullets, FireSticks, and a bullet starter! The Traditions™ NitroFire Pro VAPR is a great muzzleloader for casual muzzleloading enthusiast. With this muzzleloader, all you’ll need is to choose your preferred scope or sights, grab some Federal FireSticks, bullets, and primers, and head to the range!

The CVA® Accura LR-X™ Muzzleloader is an upgraded version of the Accura LR (Long Range). The Accura™ LR-X muzzleloader carries over most of the features from the previous model with some serious upgrades to the stock, fit and finish, and long-range terminal performance. The .50 Caliber Accura LR-X Muzzleloader is the ultimate rifle for hunters wanting long-range performance and accuracy with increased BC bullets and muzzle velocities. The CVA™ Accura LR-X Long Range Muzzleloader features the new CVA X-Treme™ stock, which sports an adjustable comb to fit any shooter and their optics of choice. This new comb adjustment is inset in the stock to allow for ambidextrous use, as there is no protruding knob to worry about. Additionally, the inset screw will allow for the gun to have a streamlined and sleek look and feel. This new CVA stock features Realtree™ Hillside Camo, with a Soft-Touch™ finish for great grip in all conditions. Adjustable stocks are gaining popularity in the shooting community due to the ability to give a shooter a proper cheek weld to the stock, whether they are using open sights or scopes with various ring heights. The CVA Accura LR-X Rifle comes standard with the legendary Bergara™ barrel, which features a Nitride coating as well as the added protection of CeraKote™ Patriot Brown on the exterior. The .50 caliber barrel on this muzzleloader is 30” long, with a threaded muzzle to accept the new CVA™ Muzzle Brake, which is threaded ¾” x 24. To properly stabilize the high BC muzzleloading bullets used in this muzzleloader, the LR-X features a 1:28” twist rate. Borrowing technology from the Paramount, this new Accura LR-X will offer a free-floated barrel without an under-barrel ramrod. Instead, all new CVA Accura’s will ship with a carbon fiber collapsible ramrod. The CVA Accura LR-X comes with a Quake™ Claw Rifle Sling, Williams® fiber optic sights, an accessory kit, a carbon fiber collapsible ramrod, and CVA Owner’s Manual. As with any CVA Accura™ Muzzleloader, there is an accuracy guarantee and a lifetime guarantee on manufacturer defects. If you have any questions about this muzzleloader, please feel free to contact our friendly and knowledgeable customer service team! Also, this gun is available on our custom packages page, where you can choose your gun, scope, rings, and case. We mount and bore sight all custom rifle combos!

The CVA® Accura LR-X™ Muzzleloader is an upgraded version of the Accura LR (Long Range). The Accura™ LR-X muzzleloader carries over most of the features from the previous model with some serious upgrades to the stock, fit and finish, and long-range terminal performance. The .45 Caliber Accura LR-X Muzzleloader is the ultimate rifle for hunters wanting long-range performance and accuracy with increased BC bullets and muzzle velocities. The CVA™ Accura LR-X Long Range Muzzleloader features the new CVA X-Treme™ stock, which sports an adjustable comb to fit any shooter and their optics of choice. This new comb adjustment is inset in the stock to allow for ambidextrous use, as there is no protruding knob to worry about. Additionally, the inset screw will allow for the gun to have a streamlined and sleek look and feel. This new CVA stock features Realtree™ Hillside Camo, with a Soft-Touch™ finish for great grip in all conditions. Adjustable stocks are gaining popularity in the shooting community due to the ability to give a shooter a proper cheek weld to the stock, whether they are using open sights or scopes with various ring heights. The CVA Accura LR-X Rifle comes standard with the legendary Bergara™ barrel, which features a Nitride coating as well as the added protection of CeraKote™ Patriot Brown on the exterior. The .45 caliber barrel on this muzzleloader is 30” long, with a threaded muzzle to accept the new CVA™ Muzzle Brake, which is threaded ¾” x 20. To properly stabilize the high BC muzzleloading bullets used in this muzzleloader, the LR-X features a 1:22” twist rate. Borrowing technology from the Paramount, this new Accura LR-X will offer a free-floated barrel without an under-barrel ramrod. Instead, all new CVA Accura’s will ship with a carbon fiber collapsible ramrod. The CVA Accura LR-X comes with a Quake™ Claw Rifle Sling, Durasight® scope rail, accessory kit, Carbon fiber collapsible ramrod, and CVA Owner’s Manual. As with any CVA Accura™ Muzzleloader, there is an accuracy guarantee and a lifetime guarantee on manufacturer defects. If you have any questions about this muzzleloader, please feel free to contact our friendly and knowledgeable customer service team! Also, this gun is available on our custom packages page, where you can choose your gun, scope, rings, and case. We mount and bore sight all custom rifle combos!

With the great looks, quality and accuracy of the ever popular Encore Pro Hunter™, this muzzleloader combines the advanced features of the Pro Hunter rifle with Thompson Center’s solid reputation for durability and performance in the field. Unlike other muzzleloaders in its line, the Pro Hunter XT features an interchangeable barrel system allowing you to use one platform for many purposes. This model ships with a .45 caliber, 28-inch muzzleloader barrel equipped from the factory. Other notable features include the muzzleloader’s improved handling and recoil reduction system made possible by the FlexTech™ stock and forend. Inside the FlexTech stock, are four Energy Burners™, along with the recoil pad, allowing the stock to compress slightly when fired, helping to reduce felt recoil by forty-two percent. Additionally the Pro Hunter XT muzzleloader includes the Speed Breech® 3, the latest in hand-removable, threaded breech plug technology. Unlike competitors' threaded breech plugs, the Speed Breech® 3's triple lead thread design gives it more area between the threads that helps prevent breech plug seizing from powder corrosion. The triple lead thread design equates to easier removal with fewer turns than conventional plugs. Removal and cleaning just got easier with Thompson Center's new Speed Breech 3. The ProHunter XT™ muzzleloader is drilled and tapped for scope mounts. It comes standard with Williams™ fiber optic sights, along with a Swing Hammer® that can be conveniently positioned toward either side of the frame, enabling easier access to the hammer under mounted scopes. Weighing in at just 7 pounds, the Pro Hunter XT features a 14-inch length of pull, crisp trigger and deadly accuracy. To protect the muzzleloader against inclement weather, Thompson Center has added its tough-as-nails finish, Weather Shield®. When applied to the barrel, receiver and other rifle critical parts, the Weather Shield coating adds an extra level of protection against corrosion, while extending the durability and life of the muzzleloader.

With the great looks, quality and accuracy of the ever popular Encore Pro Hunter™, this muzzleloader combines the advanced features of the Pro Hunter rifle with Thompson Center’s solid reputation for durability and performance in the field. Unlike other muzzleloaders in its line, the Pro Hunter XT features an interchangeable barrel system allowing you to use one platform for many purposes. This model ships with a .50 caliber, 28-inch muzzleloader barrel equipped from the factory. Other notable features include the muzzleloader’s improved handling and recoil reduction system made possible by the FlexTech™ stock and forend. Inside the FlexTech stock, are four Energy Burners™, along with the recoil pad, allowing the stock to compress slightly when fired, helping to reduce felt recoil by forty-two percent. Additionally the Pro Hunter XT muzzleloader includes the Speed Breech® 3, the latest in hand-removable, threaded breech plug technology. Unlike competitors' threaded breech plugs, the Speed Breech® 3's triple lead thread design gives it more area between the threads that helps prevent breech plug seizing from powder corrosion. The triple lead thread design equates to easier removal with fewer turns than conventional plugs. Removal and cleaning just got easier with Thompson Center's new Speed Breech 3. The ProHunter XT™ muzzleloader is drilled and tapped for scope mounts. It comes standard with Williams™ fiber optic sights, along with a Swing Hammer® that can be conveniently positioned toward either side of the frame, enabling easier access to the hammer under mounted scopes. Weighing in at just 7 pounds, the Pro Hunter XT features a 14-inch length of pull, crisp trigger and deadly accuracy. To protect the muzzleloader against inclement weather, Thompson Center has added its tough-as-nails finish, Weather Shield®. When applied to the barrel, receiver and other rifle critical parts, the Weather Shield coating adds an extra level of protection against corrosion, while extending the durability and life of the muzzleloader.

With the great looks, quality and accuracy of the ever popular Encore Pro Hunter™, this muzzleloader combines the advanced features of the Pro Hunter rifle with Thompson Center’s solid reputation for durability and performance in the field. Unlike other muzzleloaders in its line, the Pro Hunter XT features an interchangeable barrel system allowing you to use one platform for many purposes. This model ships with a .50 caliber, 20-inch muzzleloader barrel equipped from the factory. Other notable features include the muzzleloader’s improved handling and recoil reduction system made possible by the FlexTech™ stock and forend. Inside the FlexTech stock, are four Energy Burners™, along with the recoil pad, allowing the stock to compress slightly when fired, helping to reduce felt recoil by forty-two percent. Additionally the Pro Hunter XT muzzleloader includes the Speed Breech® 3, the latest in hand-removable, threaded breech plug technology. Unlike competitors' threaded breech plugs, the Speed Breech® 3's triple lead thread design gives it more area between the threads that helps prevent breech plug seizing from powder corrosion. The triple lead thread design equates to easier removal with fewer turns than conventional plugs. Removal and cleaning just got easier with Thompson Center's new Speed Breech 3. The ProHunter XT™ muzzleloader is drilled and tapped for scope mounts. It comes standard with Williams™ fiber optic sights, along with a Swing Hammer® that can be conveniently positioned toward either side of the frame, enabling easier access to the hammer under mounted scopes. Weighing in at just 7 pounds, the Pro Hunter XT features a 14-inch length of pull, crisp trigger and deadly accuracy. To protect the muzzleloader against inclement weather, Thompson Center has added its tough-as-nails finish, Weather Shield®. When applied to the barrel, receiver and other rifle critical parts, the Weather Shield coating adds an extra level of protection against corrosion, while extending the durability and life of the muzzleloader.

With the great looks, quality and accuracy of the ever popular Encore Pro Hunter™, this muzzleloader combines the advanced features of the Pro Hunter rifle with Thompson Center’s solid reputation for durability and performance in the field. The T/C Pro Hunter FS is a Firestick ignition variation of the Pro Hunter XT muzzleloader. This model ships with a .50 caliber, 28-inch muzzleloader barrel equipped from the factory. This muzzleloader utilizes the Federal® FireStick™ system, which takes the guesswork out of muzzleloading, and increases safety and simplicity. The Pro Hunter FS muzzleloader is a great gun for beginners and experienced shooters alike. This .50 caliber muzzleloader is one of the easiest to load, requires the least equipment and accessories, and is incredibly accurate. The Federal™ FireStick is a vital component to this groundbreaking new muzzleloader. The FireStick is a plastic capsule that holds pre-measured powder charges. The ability to have identical charges on every shot allows for a more consistent velocity spread, which increases accuracy and dependability. Since the FireSticks are only used once, there is no real cleaning involved in the breech area, which speeds up reloading as well. This technology reduces the need for many common accessories, which makes it much easier for beginners to get into the sport. Powder measures, powder flasks, nipple picks, speed loaders, cappers, parts soakers, and granular or pelletized powders are not needed with this muzzleloader, which can save hunters lots of money when they are first getting into muzzleloading. With this new muzzleloader, all you’ll need to carry in the field are a couple primers, bullets, FireSticks, and a bullet starter! Other notable features include the muzzleloader’s improved handling and recoil reduction system made possible by the FlexTech™ stock and forend. Inside the FlexTech stock, are four Energy Burners™, along with the recoil pad, allowing the stock to compress slightly when fired, helping to reduce felt recoil by forty-two percent. Additionally the Pro Hunter XT muzzleloader includes the Speed Breech® 3, the latest in hand-removable, threaded breech plug technology. Unlike competitors' threaded breech plugs, the Speed Breech® 3's triple lead thread design gives it more area between the threads that helps prevent breech plug seizing from powder corrosion. The triple lead thread design equates to easier removal with fewer turns than conventional plugs. Removal and cleaning just got easier with Thompson Center's new Speed Breech 3. The ProHunter XT™ muzzleloader is drilled and tapped for scope mounts. It comes standard with Williams™ fiber optic sights, along with a Swing Hammer® that can be conveniently positioned toward either side of the frame, enabling easier access to the hammer under mounted scopes. Weighing in at just 7 pounds, the Pro Hunter XT features a 14-inch length of pull, crisp trigger and deadly accuracy. To protect the muzzleloader against inclement weather, Thompson Center has added its tough-as-nails finish, Weather Shield®. When applied to the barrel, receiver and other rifle critical parts, the Weather Shield coating adds an extra level of protection against corrosion, while extending the durability and life of the muzzleloader.

With the great looks, quality and accuracy of the ever popular Encore Pro Hunter™, this muzzleloader combines the advanced features of the Pro Hunter rifle with Thompson Center’s solid reputation for durability and performance in the field. The T/C Pro Hunter FS is a Firestick ignition variation of the Pro Hunter XT muzzleloader. This model ships with a .50 caliber, 20-inch muzzleloader barrel equipped from the factory. This muzzleloader utilizes the Federal® FireStick™ system, which takes the guesswork out of muzzleloading, and increases safety and simplicity. The Pro Hunter FS muzzleloader is a great gun for beginners and experienced shooters alike. This .50 caliber muzzleloader is one of the easiest to load, requires the least equipment and accessories, and is incredibly accurate. The Federal™ FireStick is a vital component to this groundbreaking new muzzleloader. The FireStick is a plastic capsule that holds pre-measured powder charges. The ability to have identical charges on every shot allows for a more consistent velocity spread, which increases accuracy and dependability. Since the FireSticks are only used once, there is no real cleaning involved in the breech area, which speeds up reloading as well. This technology reduces the need for many common accessories, which makes it much easier for beginners to get into the sport. Powder measures, powder flasks, nipple picks, speed loaders, cappers, parts soakers, and granular or pelletized powders are not needed with this muzzleloader, which can save hunters lots of money when they are first getting into muzzleloading. With this new muzzleloader, all you’ll need to carry in the field are a couple primers, bullets, FireSticks, and a bullet starter! Other notable features include the muzzleloader’s improved handling and recoil reduction system made possible by the FlexTech™ stock and forend. Inside the FlexTech stock, are four Energy Burners™, along with the recoil pad, allowing the stock to compress slightly when fired, helping to reduce felt recoil by forty-two percent. Additionally the Pro Hunter XT muzzleloader includes the Speed Breech® 3, the latest in hand-removable, threaded breech plug technology. Unlike competitors' threaded breech plugs, the Speed Breech® 3's triple lead thread design gives it more area between the threads that helps prevent breech plug seizing from powder corrosion. The triple lead thread design equates to easier removal with fewer turns than conventional plugs. Removal and cleaning just got easier with Thompson Center's new Speed Breech 3. The ProHunter XT™ muzzleloader is drilled and tapped for scope mounts. It comes standard with Williams™ fiber optic sights, along with a Swing Hammer® that can be conveniently positioned toward either side of the frame, enabling easier access to the hammer under mounted scopes. Weighing in at just 7 pounds, the Pro Hunter XT features a 14-inch length of pull, crisp trigger and deadly accuracy. To protect the muzzleloader against inclement weather, Thompson Center has added its tough-as-nails finish, Weather Shield®. When applied to the barrel, receiver and other rifle critical parts, the Weather Shield coating adds an extra level of protection against corrosion, while extending the durability and life of the muzzleloader.

The Traditions NitroBolt, experience the next evolution in muzzleloading with the world’s first Firestick-capable bolt-action muzzleloader. Designed for precision, reliability, and ease of use, the NitroBolt offers an innovative shooting experience that blends modern technology with time-tested accuracy. The NitroBolt features a 24-inch chromoly steel fluted and tapered barrel, providing superior strength while reducing weight for improved handling. With a 1:24 VAPR twist rate, the barrel ensures exceptional bullet stabilization, leading to improved accuracy and tighter groupings downrange. The free-floating barrel and pillar-bedded stock enhance stability and precision by minimizing inconsistencies caused by stock movement or unwanted barrel contact. This muzzleloader is equipped with a three-position safety, offering added security and flexibility for carrying, loading, and firing. The patented Firestick extractor ensures quick and effortless removal of spent Firestick casings, improving ease of use in the field. The adjustable length of pull and cheek piece allow for a customized fit, maximizing comfort and control for shooters of all sizes. For added performance, the NitroBolt features three locking lugs that enhance bolt strength and provide a secure lockup for consistent firing. The 60-degree bolt handle allows for smooth, effortless cycling, while the cocking indicator provides a quick visual and tactile reference to the firearm’s status. The Traditions NitroBolt is designed for shooters who demand innovation and accuracy. Whether you're a seasoned hunter or a shooting enthusiast, this Firestick-capable bolt-action muzzleloader delivers the reliability and ease of use needed for an exceptional experience. Upgrade your hunting and shooting performance with the Traditions NitroBolt—where advanced technology meets precision craftsmanship. the world’s first Firestick-capable bolt-action muzzleloader. Designed for precision, reliability, and ease of use, the NitroBolt offers an innovative shooting experience that capitalizes on modern technology to provide an incredible platform for new and seasoned muzzleloading enthusiasts alike. The NitroBolt features a 24-inch chromoly steel fluted and tapered barrel, providing superior strength while reducing weight for improved handling. With a 1:24 VAPR twist rate, the barrel ensures exceptional bullet stabilization, leading to improved accuracy and tighter groupings downrange. The free-floating barrel and pillar-bedded stock enhance stability and precision by minimizing inconsistencies caused by stock movement or unwanted barrel contact. This muzzleloader is equipped with a three-position safety, offering added security and flexibility for carrying, loading, and firing. The patented Firestick extractor ensures quick and effortless removal of spent Firestick casings, improving ease of use in the field. The adjustable length of pull and cheek piece allow for a customized fit, maximizing comfort and control for shooters of all sizes. For added performance, the NitroBolt features three locking lugs that enhance bolt strength and provide a secure lockup for consistent firing. The 60-degree bolt handle allows for smooth, effortless cycling, while the cocking indicator provides a quick visual and tactile reference to the firearm’s status. The Traditions NitroBolt is designed for shooters who demand innovation and accuracy. Whether you're a seasoned hunter or a shooting enthusiast, this Firestick-capable bolt-action muzzleloader delivers the reliability and ease of use needed for an exceptional experience. Upgrade your hunting and shooting performance with the Traditions NitroBolt—where advanced technology meets precision craftsmanship.

The CVA™ Paramount Muzzleloader is the latest long-range muzzleloader from CVA. This gun is packed full of premium features to ensure great accuracy, high velocity, and a comfortable feel, ensuring success at ranges further than any other black powder muzzleloader. The CVA™ Paramount features a fast-twist .45 caliber Bergara™ barrel, VariFlame™ ignition system, Bergara™ HMR stock, a proprietary action, as well as an all-new ELR™ bullet that was designed specifically for this muzzleloader. With all of these features, the Paramount will provide sub-MOA accuracy past 300 yards, with a bullet that is leaving the muzzle at over 2,200 fps. If you’re looking for a long-range muzzleloader, the Paramount is the gun for you. For the last several years, the Bergara barrels on the CVA™ Accura V2 line have been known as some of the most accurate muzzleloading barrels on the market. The CVA™ Paramount features a .45 caliber, 26-inch threaded Nitride-treated Bergara barrel, which is manufactured from 416 stainless steel. The threaded end is compatible with the CVA Paramount .45 caliber muzzle brake. With the high velocities of the Paramount, a longer, heavier high ballistic coefficient bullet, a faster twist rate was needed to stabilize the PowerBelt ELR bullet. The Paramount barrel features a 1:22” twist rate, which has resulted in accuracy of well under MOA groupings out past 300 yards. Additionally, the Paramount Bergara barrel features a bullet guiding muzzle and interrupted fluting for weight and heat dispersion. The CVA™ Paramount features the VariFlame ignition system for a faster, hotter, and more consistent powder burn. While most muzzleloaders use 209 primers, the VariFlame System in the Paramount allows for the use of Large Rifle Primers. With the VariFlame™ Ignition, the Paramount is capable of burning 160 grains of Blackhorn 209 by volume (112 grains by weight) with the PowerBelt ELR 280gr bullet leaving the muzzle at over 2,200 fps. Included with the Paramount is a special tool that will allow you to remove spent primers from the VariFlame adapters, so you can reuse the adapters multiple times over. With the initial rifle purchase, each customer will receive a pack of VariFlame™ Adapters, as well as the VariFlame™ re-priming tool. One of the most aesthetically appealing features of the CVA™ Paramount is the Bergara HMR stock. This stock not only looks nice, but also has all the features that a serious long-range shooter will need. There is an aluminum mini chassis that runs from the hand grip, all the way to the fore end, which provides for excellent rigidity and better support to the Paramount action. Because of the strength and rigidity of the aluminum internal chassis, the CVA Paramount features a fully free-floated barrel, which results in better accuracy. Additionally, the HMR stock offers easy adjustments for both length of pull, as well as the cheek height. The floor plate in this stock has a container for holding four VariFlame™ adapters for easy and quick access. Up front, the HMR stock features two swivel studs for the ability to easily attach both a bipod and sling with conventional studs. On both sides of this stock, there are also flush-cup sling swivel mounts, which is a newer way of mounting slings that has proven to be more comfortable when carrying heavier guns. One of the first things that most people notice on the Paramount® is the lack of a ramrod. Because of the free-floated barrel, CVA designed a quick-deployable ramrod, that is stored in a Molle pouch on either your sling or belt. This unique design allows for quick reloading in the field, but also compact and easy storage. The quick-deployable ramrod is not used for cleaning, so the Paramount will also ship with a solid aluminum ramrod and Palmsaver™ handle. The CVA™ Paramount action is one of the more unique features of this muzzleloader. To create a tight seal to the VariFlame™ breech plug, CVA has designed and patented a unique bolt assembly. This new self-headspacing bolt is spring-loaded, which allows for a tight seal to the VariFlame adapters every time, to eliminate blowback. Additionally, this new bolt assembly comes apart without any tools and is incredibly easy to clean. The Paramount action is drilled and tapped for scope mounts, with a Remington 700 pattern, so mounts are easy to find. While the CVA™ Paramount looks like a standard bolt action rifle, the action is very different and is not able to be converted to any centerfire gun, which allows this gun to be purchased without a 4473 in most states. To make the Paramount® muzzleloader a success, CVA teamed up with Michael McMichaels of PowerBelt™ Bullets to create an all-new bullet for this gun. Wanting a higher ballistic coefficient than previously offered, they created the PowerBelt ELR (Extended Long-Range) bullet. This 280 grain bullet offers a BC of .452, which is considerably higher than other projectiles on the market. With the 1:22” twist rate, 140 grains of Blackhorn 209, and the Bergara barrel on the CVA Paramount, accuracy has resulted in under 1 MOA at 300 yards. Most muzzleloaders on the market today drop between 13 and 18 inches between 100 and 200 yards. The Paramount system, with the better bullets and velocities, has proven to drop only 18 inches between 200 and 300 yards, which is unheard of in muzzleloading. Not only does the PowerBelt ELR shoot great groupings, but this bullet will also be great for deer and elk sized game at extended ranges. In summary, the CVA™ Paramount muzzleloader is a high-performance muzzleloader that will reach out past 300 yards. With the unveiling of this gun, CVA has shown that they are serious about investing in the muzzleloading market and giving the customers exactly what they’re looking for. The Paramount will ship with 15 PowerBelt™ ELR bullets, 10 VariFlame™ adapters, a VariFlame™ re-priming tool, breech plug wrench, fast-deploying ramrod, solid aluminum cleaning rod, and a Quake Sling with flush-cup mounts. Additionally, if you would like a custom scope mount package that is mounted and bore-sighted by our team, please reach out to our customer service department for more details. The CVA Paramount Muzzle Brake is recommended and can be purchased here: Paramount Muzzle Brake. #html-body [data-pb-style="607FD7CC0928C"]{justify-content: flex-start; display: flex; flex-direction: column; background-position: left top; background-size: cover; background-repeat: no-repeat; background-attachment: scroll; border-style: none; border-width: 1px; border-radius: 0px; margin: 0px; padding: 0px;}#html-body [data-pb-style="607FD7CC092A4"]{border-style: none; border-width: 1px; border-radius: 0px; margin: 0px; padding: 0px;}

The CVA™ Paramount HTR Muzzleloader is a lightweight version of the ultra-popular CVA Paramount. This HTR Muzzleloader carries over some of the most popular features of the Paramount, but with an upgraded stock design and a new caliber. The Paramount HTR in .40 caliber is the ultimate long-range muzzleloader. This gun is equally at home chasing whitetails in the Eastern US, as it is climbing the Western mountains for elk and mule deer. The Paramount HTR features the CVA™ HTR stock, which has an adjustable comb to fit any shooter and optic choice. This comb adjustment is inset in the stock to allow for ambidextrous use, as there is no protruding knob to worry about. Adjustable stocks are gaining popularity in the shooting community due to the ability to give a shooter a proper cheek weld to the stock, whether they are using open sights or scopes with various ring heights. Additionally, the inset screw gives the Paramount HTR™ a streamlined and sleek look and feel. The CVA™ HTR stock features Realtree Hillside camo, with a Soft Touch finish for great grip in all conditions. If it isn’t broken why fix it? Why move away from something that seems to work so well? This is the most common question we get about the introduction of the .40 caliber. After the introduction of the PowerBelt ELR bullet in 2019, muzzleloading rifles have been able to stretch their range while maintaining incredible accuracy and kinetic energy. With the addition of .40 caliber to the CVA Paramount HTR, this gun will be capable of incredibly high velocities and be able to reach out much further than its predecessor, while still maintaining high energy. With a BC on this .40 Caliber PowerBelt ELR of .360 and muzzle velocities over 2,800 feet per second, the CVA Paramount HTR in .40 cal will have the same bullet drop at 400 yards as a .300 Win Mag! This greatly extends the range of the Paramount muzzleloaders and increases terminal performance. Currently, the .40 caliber muzzleloaders are legal in most states for deer and elk, but here is a convenient map to consider the legalities in your state here . The barrel and action on the CVA™ Paramount HTR will be the same Bergara barrel as the standard Paramount, which features a Nitride coating. The .40 caliber barrel on this muzzleloader is 26” long, with a threaded muzzle to accept the CVA Paramount Muzzle Brake, which is threaded ¾” x 20. To properly stabilize the high BC muzzleloading bullets used in this muzzleloader, the HTR features a 1:20” twist rate. The Bergara™ barrel on the Paramount HTR features interrupted fluting for lighter weight and greater heat dispersion. Just like the previous Paramount, the HTR features a free-floated barrel, which removes the under-barrel ramrod. The Paramount HTR will ship with a collapsible .40 caliber carbon-fiber ramrod. The CVA™ Paramount HTR Muzzleloader features the patented VariFlame™ Ignition System for a faster, hotter and more consistent powder burn. While most muzzleloaders use 209 primers, the VariFlame™ System in the Paramount allows for the use of large rifle primers. With the VariFlame™ Ignition, the Paramount HTR is capable of burning 150 grains by volume (105 grains by weight) of Blackhorn 209 with the PowerBelt ELR 230 grain bullet leaving the muzzle at over 2,800 fps. Included with the Paramount HTR Rifle is a special tool that will allow you to remove spent primers from the VariFlame™ adapters so you can reuse the adapters multiple times. With the initial rifle purchase, each customer will receive a pack of VariFlame™ Adapters, as well as the VariFlame™ re-priming tool. The CVA™ Paramount HTR muzzleloader is a high-performance muzzleloader is designed to deliver sub-MOA accuracy out past 300 yards. This new model is just what western hunters and long-range shooters are looking for in a muzzleloader. The Paramount HTR comes with 15 PowerBelt™ ELR bullets, 10 VariFlame™ adapters, a VariFlame™ re-priming tool, breech plug wrench, fast-deploying ramrod and Quake™ Claw Sling with flush-cup mounts. Additionally, if you would like a custom scope mount package that is mounted and bore-sighted by our team, please reach out to our customer service department for more details.

The CVA™ Paramount Muzzleloader is a lightweight version of the ultra-popular CVA Paramount. This Paramount Muzzleloader carries over some of the most popular features of the Paramount, but with an upgraded stock design and Nitride™ finish. The CVA Paramount in .45 caliber is the ultimate long-range muzzleloader. This gun is equally at home chasing whitetails in the Eastern US, as it is climbing the Western mountains for elk and mule deer. The Paramount features the CVA™ HMR stock, which has an adjustable comb to fit any shooter and optic choice. This comb adjustment is inset in the stock to allow for ambidextrous use, as there is no protruding knob to worry about. Adjustable stocks are gaining popularity in the shooting community due to the ability to give a shooter a proper cheek weld to the stock, whether they are using open sights or scopes with various ring heights. Additionally, the inset screw gives the Paramount™ a streamlined and sleek look and feel. The CVA™ Paramount stock features Realtree Hillside camo, with a Soft Touch finish for great grip in all conditions. The barrel and action on the CVA™ Paramount will be the same Bergara barrel as the standard Paramount, which features a Nitride coating. The .45 caliber barrel on this muzzleloader is 26” long, with a threaded muzzle to accept the CVA Paramount Muzzle Brake, which is threaded ¾” x 20. To properly stabilize the high BC muzzleloading bullets used in this muzzleloader, the Paramount features a 1:22” twist rate. The Bergara™ barrel on the Paramount features interrupted fluting for lighter weight and greater heat dispersion. Just like the previous Paramounts, the new model features a free-floated barrel, which removes the under-barrel ramrod. The CVA Paramount will ship with a collapsible .45 caliber carbon-fiber ramrod. The CVA™ Paramount Muzzleloader features the patented VariFlame™ Ignition System for a faster, hotter and more consistent powder burn. While most muzzleloaders use 209 primers, the VariFlame™ System in the Paramount allows for the use of large rifle primers. With the VariFlame™ Ignition, the Paramount is capable of burning 160 grains by volume (112 grains by weight) of Blackhorn 209 with the PowerBelt ELR 280 grain bullet leaving the muzzle at over 2,600 fps. Included with the Paramount Rifle is a special tool that will allow you to remove spent primers from the VariFlame™ adapters so you can reuse the adapters multiple times. With the initial rifle purchase, each customer will receive a pack of VariFlame™ Adapters, as well as the VariFlame™ re-priming tool. The CVA™ Paramount muzzleloader is a high-performance muzzleloader is designed to deliver sub-MOA accuracy out past 300 yards. This new model is just what western hunters and long-range shooters are looking for in a muzzleloader. The Paramount comes with 15 PowerBelt™ ELR bullets, 10 VariFlame™ adapters, a VariFlame™ re-priming tool, breech plug wrench, fast-deploying ramrod and Quake™ Claw Sling with flush-cup mounts. Additionally, if you would like a custom scope mount package that is mounted and bore-sighted by our team, please reach out to our customer service department for more details.

The Remington® 700 Ultimate™ Muzzeloader is Remington’s only muzzleloader, but that doesn’t stop Remington from packing this gun with the best features. This rifle offers a higher level of performance and accuracy than any other muzzleloader on the market. Remington® designed the 700 Ultimate™ Muzzleloader exclusively to be the first muzzleloader to reach 300 yards and possibly beyond. The Timney trigger, Bell & Carlson composite stock, and floor plate are features usually found on centerfire rifles, but Remington has integrated them beautifully into this exceptional bolt-action muzzleloader. This rifle features the Ultimate™ Ignition System, which until now, has not been available on any mass-produced muzzleloader. Remington adapted this technology to work with their timeless 700 bolt-action. Instead of a musket cap or shotgun primer, the Ultimate Muzzleloader uses a primed centerfire magnum rifle casing, which mounts to the breech plug through the 700 bolt-action. Loading the primer is almost identical to loading a Remington 700 centerfire rifle. The primer and casing seat against the breech plug in an innovative way to produce a hotter, more direct powder burn, allowing this muzzleloader to efficiently burn up to 200 grains of powder. The Remington® 700 Ultimate™ Muzzleloader is quick and easy to clean with its stainless steel, satin-finished barrel, and Bell & Carlson attractive, black composite stock. As a bonus, the Ultimate™ Ignition System allows the rifle to be cleaned without removing the breech plug. When cleaning the barrel, simply rotate the ramrod and patch to clean the face of the breech plug. The Remington Ultimate Muzzleloader ships with 24 pack of primed magnum rifle casings and 24 saboted Barnes™ bullets. The gun comes with sling swivel studs and comes drilled and tapered for scope mounts. Finally, the Ultimate Muzzleloader comes complete with custom hard gun case for travel or storage, along with Remington’s two-year warranty. If you’re looking to take your muzzleloader hunting to a whole new level, the state-of-the art, Remington 700 Ultimate Muzzleloader will take you to 300+ yards, and is guaranteed not to disappoint.

The CVA™ Paramount HTR Muzzleloader is a lightweight version of the ultra-popular CVA Paramount. This HTR Muzzleloader carries over some of the most popular features of the Paramount, but with an upgraded stock design and Nitride™ finish. The Paramount HTR in .45 caliber is the ultimate long-range muzzleloader. This gun is equally at home chasing whitetails in the Eastern US, as it is climbing the Western mountains for elk and mule deer. The Paramount HTR features the CVA™ HTR stock, which has an adjustable comb to fit any shooter and optic choice. This comb adjustment is inset in the stock to allow for ambidextrous use, as there is no protruding knob to worry about. Adjustable stocks are gaining popularity in the shooting community due to the ability to give a shooter a proper cheek weld to the stock, whether they are using open sights or scopes with various ring heights. Additionally, the inset screw gives the Paramount HTR™ a streamlined and sleek look and feel. The CVA™ HTR stock features Realtree Hillside camo, with a Soft Touch finish for great grip in all conditions. The barrel and action on the CVA™ Paramount HTR will be the same Bergara barrel as the standard Paramount, which features a Nitride coating. The .45 caliber barrel on this muzzleloader is 26” long, with a threaded muzzle to accept the CVA Paramount Muzzle Brake, which is threaded ¾” x 20. To properly stabilize the high BC muzzleloading bullets used in this muzzleloader, the HTR features a 1:22” twist rate. The Bergara™ barrel on the Paramount HTR features interrupted fluting for lighter weight and greater heat dispersion. Just like the previous Paramount, the HTR features a free-floated barrel, which removes the under-barrel ramrod. The Paramount HTR will ship with a collapsible .45 caliber carbon-fiber ramrod. The CVA™ Paramount HTR Muzzleloader features the patented VariFlame™ Ignition System for a faster, hotter and more consistent powder burn. While most muzzleloaders use 209 primers, the VariFlame™ System in the Paramount allows for the use of large rifle primers. With the VariFlame™ Ignition, the Paramount HTR is capable of burning 160 grains by volume (112 grains by weight) of Blackhorn 209 with the PowerBelt ELR 280 grain bullet leaving the muzzle at over 2,600 fps. Included with the Paramount HTR Rifle is a special tool that will allow you to remove spent primers from the VariFlame™ adapters so you can reuse the adapters multiple times. With the initial rifle purchase, each customer will receive a pack of VariFlame™ Adapters, as well as the VariFlame™ re-priming tool. The CVA™ Paramount HTR muzzleloader is a high-performance muzzleloader is designed to deliver sub-MOA accuracy out past 300 yards. This new model is just what western hunters and long-range shooters are looking for in a muzzleloader. The Paramount HTR comes with 15 PowerBelt™ ELR bullets, 10 VariFlame™ adapters, a VariFlame™ re-priming tool, breech plug wrench, fast-deploying ramrod and Quake™ Claw Sling with flush-cup mounts. Additionally, if you would like a custom scope mount package that is mounted and bore-sighted by our team, please reach out to our customer service department for more details. #html-body [data-pb-style="607FD7CC5925B"]{justify-content: flex-start; display: flex; flex-direction: column; background-position: left top; background-size: cover; background-repeat: no-repeat; background-attachment: scroll; border-style: none; border-width: 1px; border-radius: 0px; margin: 0px; padding: 0px;}#html-body [data-pb-style="607FD7CC59271"]{border-style: none; border-width: 1px; border-radius: 0px; margin: 0px; padding: 0px;}

The Remington® 700 Ultimate LSS Muzzeloader is Remington’s only muzzleloader, but that doesn’t stop Remington from packing this gun with the best features. This rifle offers a higher level of performance and accuracy than any other muzzleloader on the market. Remington designed the 700 LSS Ultimate Muzzleloader exclusively to be the first muzzleloader to reach 300 yards and possibly beyond. The Timney trigger, laminate gray wood stock, and floor plate are features usually found on centerfire rifles, but Remington has integrated them into this exceptional bolt-action muzzleloader. This rifle features the Ultimate™ Ignition System, which until now, has not been available on any mass-produced muzzleloader. Remington adapted this technology to work with their timeless 700-bolt action. Instead of a musket cap or shotgun primer, the LSS Ultimate Muzzleloader uses a primed centerfire magnum rifle casing, which mounts to the breech plug through the 700-bolt action. Loading the primer is almost identical to loading a Remington 700 centerfire rifle. The primer and casing seat against the breech plug in an innovative way to produce a hotter, more direct powder burn, allowing this muzzleloader to efficiently burn up to 200 grains of powder. The Remington 700 Ultimate Muzzleloader is quick and easy to clean with its stainless steel, satin-finished barrel, and handsome-laminated gray wood stock. As a bonus, the Ultimate™ Ignition System allows the rifle to be cleaned without removing the breech plug. When cleaning the barrel, simply rotate the ramrod and patch to clean the face of the breech plug. The Remington Ultimate Muzzleloader ships with 24 pack of primed magnum rifle casings and 24 saboted Barnes bullets. Gun comes with sling swivel studs, Remington Iron Sights, and comes drilled and tapered for scope mount. Finally, the Ultimate Muzzleloader comes complete with custom hard gun case for travel or storage, along with Remington’s two-year warranty. If you’re looking to take your muzzleloader hunting to a whole new level, the state-of-the art, Remington 700 LLS Ultimate Muzzleloader will take you to 300+ yards, and is guaranteed not to disappoint.

The CVA Paramount Pro V2 Muzzleloader is CVA's lightest and most versatile Paramount ever. The Paramount V2 is an upgraded version of this already feature-packed performance muzzleloader. The Paramount Pro V2 has an upgraded TriggerTech™ trigger, custom Greyboe™ stock, and CeraKote/Nitride finish on the barrel. This .45 caliber muzzleloader still offers all of the great features of the standard Paramount but is built more for the long-range mountain hunter. The most noticeable difference between the standard CVA Paramount and the Paramount Pro is the distinct difference in looks and styling. The stock on the Pro V2 is a custom-designed Greyboe stock, which features a proprietary camo pattern. The Greyboe stock is fiberglass and comes with an adjustable cheek riser for alignment with your scope, and a comfortable grip that accommodates a variety of shooters. This stock offers two front sling swivel studs, to attach a sling and bipod separately, or even an aftermarket Picatinny style rail. The Greyboe stock on the Paramount Pro V2 also offers several flush cup attachment points, for other sling mounting options. The removable stock spacers allow for precise LOP adjustment for any shooter and the LimbSaver™ recoil pad reduces felt recoil up to 50%. The CVA Paramount Pro features a .45 caliber, 26-inch Nitride-treated Bergara barrel, which is manufactured from 416 stainless steel. With the high velocities of the Paramount Pro, with a longer, heavier high ballistic coefficient bullet, a faster twist rate was needed to stabilize the PowerBelt ELR bullet. The Paramount Pro barrel features a 1:22” twist rate, which has resulted in accuracy of well under MOA groupings out past 300 yards. Additionally, the Paramount Bergara barrel features a bullet-guiding muzzle and interrupted fluting for weight and heat dispersion. Also new for 2020, all Paramount muzzleloaders will offer threaded muzzles to accept a muzzle brake, which CVA specifically designed for the Paramount. The new Paramount Muzzle Brake will allow for significantly reduced recoil out of these high-velocity muzzleloaders. TriggerTech™ triggers will be a standard feature in the Paramount Pro muzzleloaders, which is a great upgrade from the factory triggers in the standard Paramount. The TriggerTech offers an external adjustment screw, which allows for click adjustments by ounce between 1.5 and 3.5 pounds. TriggerTech has become one of the leading triggers for centerfire rifles, and this addition to the Paramount Pro V2 is a welcome improvement. The Paramount Pro V2 also features the VariFlame ignition system for a faster, hotter, and more consistent powder burn. While most muzzleloaders use 209 primers, the VariFlame System in the Paramount allows for the use of Large Rifle Primers. With the VariFlame Ignition, the Paramount Pro is capable of burning 160 grains of Blackhorn 209 by volume (112 grains by weight) with the PowerBelt ELR 280gr bullet leaving the muzzle at over 2,200 fps. Included with the Paramount is a special tool that will allow you to remove spent primers from the VariFlame adapters, so you can reuse the adapters multiple times over. With the initial rifle purchase, each customer will receive a pack of VariFlame™ Adapters, as well as the VariFlame™ re-priming tool. Just like the standard Paramount Pro, the V2 model offers a fully free-floated barrel, without the ramrod stored underneath and tucked into the stock. For loading the Paramount Pro V2, CVA designed a quick-deployable ramrod, that is stored in a Molle pouch on either your sling or belt. This unique design allows for quick reloading in the field while providing compact and easy storage. The quick-deployable ramrod is not used for cleaning, so the Paramount will also ship with a solid aluminum ramrod and Palmsaver™ handle. The CVA™ Paramount V2 action is one of the more unique features of this muzzleloader. To create a tight seal to the VariFlame™ breech plug, CVA has designed and patented a unique bolt assembly. This new self-headspacing bolt is spring-loaded, which allows for a tight seal to the VariFlame adapters every time, to eliminate blowback. Additionally, this new bolt assembly comes apart without any tools and is incredibly easy to clean. The Paramount action is drilled and tapped for scope mounts, with a Remington 700 pattern, so mounts are easy to find. While the CVA™ Paramount V2 looks like a standard bolt action rifle, the action is very different and is not able to be converted to any centerfire gun, which allows this gun to be purchased without a 4473 in most states. In summary, the CVA Paramount Pro V2 muzzleloader is a high-performance muzzleloader that will reach out past 300 yards, with sub-MOA accuracy. This upgraded Pro model is just what western hunters and long-range shooters are looking for in a muzzleloader. The Paramount will ship with 15 PowerBelt™ ELR bullets, 10 VariFlame™ adapters, a VariFlame™ re-priming tool, breech plug wrench, fast-deploying ramrod, solid aluminum cleaning rod, and a Quake Sling with flush-cup mounts. Additionally, if you would like a custom scope mount package that is mounted and bore-sighted by our team, please reach out to our customer service department for more details. The CVA Paramount Muzzle Brake is recommended and can be purchased here: Paramount Muzzle Brake.

The CVA Paramount Pro V2 Muzzleloader is CVA's lightest and most versatile Paramount ever. The Paramount V2 is an upgraded version of this already feature-packed performance muzzleloader. The Paramount Pro V2 has an upgraded TriggerTech™ trigger, Williams™ micro-adjust peep sights, custom Greyboe™ stock, and CeraKote/Nitride finish on the barrel. This .50 caliber muzzleloader still offers all of the great features of the standard Paramount but is built more for the long-range mountain hunter. The most noticeable difference between the standard CVA Paramount and the Paramount Pro is the distinct difference in looks and styling. The stock on the Pro V2 is a custom-designed Greyboe stock, which features a proprietary camo pattern. The Greyboe stock is fiberglass and comes with an adjustable cheek riser for alignment with your scope, and a comfortable grip that accommodates a variety of shooters. This stock offers two front sling swivel studs, to attach a sling and bipod separately, or even an aftermarket Picatinny style rail. The Greyboe stock on the Paramount Pro V2 also offers several flush cup attachment points, for other sling mounting options. The removable stock spacers allow for precise LOP adjustment for any shooter and the LimbSaver™ recoil pad reduces felt recoil up to 50%. The CVA Paramount Pro features a .50 caliber, 26-inch Nitride-treated Bergara barrel, which is manufactured from 416 stainless steel. With the high velocities of the Paramount Pro, with a longer, heavier high ballistic coefficient bullet, a faster twist rate was needed to stabilize the PowerBelt ELR bullet. The Paramount Pro barrel features a 1:22” twist rate, which has resulted in accuracy of well under MOA groupings out past 300 yards. Additionally, the Paramount Bergara barrel features a bullet-guiding muzzle and interrupted fluting for weight and heat dispersion. Also new for 2020, all Paramount muzzleloaders will offer threaded muzzles to accept a muzzle brake, which CVA specifically designed for the Paramount. The new Paramount Muzzle Brake will allow for significantly reduced recoil out of these high-velocity muzzleloaders. TriggerTech™ triggers will be a standard feature in the Paramount Pro muzzleloaders, which is a great upgrade from the factory triggers in the standard Paramount. The TriggerTech offers an external adjustment screw, which allows for click adjustments by ounce between 1.5 and 3.5 pounds. TriggerTech has become one of the leading triggers for centerfire rifles, and this addition to the Paramount Pro V2 is a welcome improvement. The Paramount Pro V2 also features the VariFlame ignition system for a faster, hotter, and more consistent powder burn. While most muzzleloaders use 209 primers, the VariFlame System in the Paramount allows for the use of Large Rifle Primers. With the VariFlame Ignition, the Paramount Pro is capable of burning 160 grains of Blackhorn 209 by volume (112 grains by weight) with the PowerBelt ELR 280gr bullet leaving the muzzle at over 2,200 fps. Included with the Paramount is a special tool that will allow you to remove spent primers from the VariFlame adapters, so you can reuse the adapters multiple times over. With the initial rifle purchase, each customer will receive a pack of VariFlame™ Adapters, as well as the VariFlame™ re-priming tool. Just like the standard Paramount Pro, the V2 model offers a fully free-floated barrel, without the ramrod stored underneath and tucked into the stock. For loading the Paramount Pro V2, CVA designed a quick-deployable ramrod, that is stored in a Molle pouch on either your sling or belt. This unique design allows for quick reloading in the field while providing compact and easy storage. The quick-deployable ramrod is not used for cleaning, so the Paramount will also ship with a solid aluminum ramrod and Palmsaver™ handle. The CVA™ Paramount V2 action is one of the more unique features of this muzzleloader. To create a tight seal to the VariFlame™ breech plug, CVA has designed and patented a unique bolt assembly. This new self-headspacing bolt is spring-loaded, which allows for a tight seal to the VariFlame adapters every time, to eliminate blowback. Additionally, this new bolt assembly comes apart without any tools and is incredibly easy to clean. The Paramount action is drilled and tapped for scope mounts, with a Remington 700 pattern, so mounts are easy to find. While the CVA™ Paramount V2 looks like a standard bolt action rifle, the action is very different and is not able to be converted to any centerfire gun, which allows this gun to be purchased without a 4473 in most states. In summary, the CVA Paramount Pro V2 muzzleloader is a high-performance muzzleloader that will reach out past 300 yards, with sub-MOA accuracy. This upgraded Pro model is just what western hunters and long-range shooters are looking for in a muzzleloader. The Paramount will ship with 15 PowerBelt™ ELR bullets, 10 VariFlame™ adapters, a VariFlame™ re-priming tool, breech plug wrench, fast-deploying ramrod, solid aluminum cleaning rod, and a Quake Sling with flush-cup mounts. Additionally, if you would like a custom scope mount package that is mounted and bore-sighted by our team, please reach out to our customer service department for more details. The CVA Paramount Muzzle Brake is recommended and can be purchased here: Paramount Muzzle Brake.

The CVA Paramount Pro V2 Muzzleloader comes complete with a mounted and bore-sighted 3-9x40mm Leupold™ VX Freedom™ UltimateSlam Muzzleloader Scope and Muzzle-Loaders.com soft rifle case. The VX Freedom UltimateSlam™ S.A.B.R reticle is the preeminent black powder scope designed specifically for muzzleloaders, taking the guesswork out of hold over angles for even the most difficult of shots. The exclusive ballistic reticle, coinciding with the most popular black powder loads today, provides you with exact aiming points from 50 to 300 yards. The glass-engraved ballistic reticle is unbreakable, and the Multi-Coat 4™ optics are clear and bright. The Paramount Pro V2 has an upgraded TriggerTech™ trigger, custom Greyboe™ stock, and CeraKote/Nitride finish on the barrel. This .45 caliber muzzleloader still offers all of the great features of the standard Paramount but is built more for the long-range mountain hunter. The most noticeable difference between the standard CVA Paramount and the Paramount Pro is the distinct difference in looks and styling. The stock on the Pro V2 is a custom-designed Greyboe stock, which features a proprietary camo pattern. The Greyboe stock is fiberglass and comes with an adjustable cheek riser for alignment with your scope, and a comfortable grip that accommodates a variety of shooters. This stock offers two front sling swivel studs, to attach a sling and bipod separately, or even an aftermarket Picatinny style rail. The Greyboe stock on the Paramount Pro V2 also offers several flush cup attachment points, for other sling mounting options. The removable stock spacers allow for precise LOP adjustment for any shooter and the LimbSaver™ recoil pad reduces felt recoil up to 50%. The CVA Paramount Pro features a .45 caliber, 26-inch Nitride-treated Bergara barrel, which is manufactured from 416 stainless steel. With the high velocities of the Paramount Pro, with a longer, heavier high ballistic coefficient bullet, a faster twist rate was needed to stabilize the PowerBelt ELR bullet. The Paramount Pro barrel features a 1:22” twist rate, which has resulted in accuracy of well under MOA groupings out past 300 yards. Additionally, the Paramount Bergara barrel features a bullet-guiding muzzle and interrupted fluting for weight and heat dispersion. Also new for 2020, all Paramount muzzleloaders will offer threaded muzzles to accept a muzzle brake, which CVA specifically designed for the Paramount. The new Paramount Muzzle Brake will allow for significantly reduced recoil out of these high-velocity muzzleloaders. TriggerTech™ triggers will be a standard feature in the Paramount Pro muzzleloaders, which is a great upgrade from the factory triggers in the standard Paramount. The TriggerTech offers an external adjustment screw, which allows for click adjustments by ounce between 1.5 and 3.5 pounds. TriggerTech has become one of the leading triggers for centerfire rifles, and this addition to the Paramount Pro V2 is a welcome improvement. The Paramount Pro V2 also features the VariFlame ignition system for a faster, hotter, and more consistent powder burn. While most muzzleloaders use 209 primers, the VariFlame System in the Paramount allows for the use of Large Rifle Primers. With the VariFlame Ignition, the Paramount Pro is capable of burning 160 grains of Blackhorn 209 by volume (112 grains by weight) with the PowerBelt ELR 280gr bullet leaving the muzzle at over 2,200 fps. Included with the Paramount is a special tool that will allow you to remove spent primers from the VariFlame adapters, so you can reuse the adapters multiple times over. With the initial rifle purchase, each customer will receive a pack of VariFlame™ Adapters, as well as the VariFlame™ re-priming tool. Just like the standard Paramount Pro, the V2 model offers a fully free-floated barrel, without the ramrod stored underneath and tucked into the stock. For loading the Paramount Pro V2, CVA designed a quick-deployable ramrod, that is stored in a Molle pouch on either your sling or belt. This unique design allows for quick reloading in the field while providing compact and easy storage. The quick-deployable ramrod is not used for cleaning, so the Paramount will also ship with a solid aluminum ramrod and Palmsaver™ handle. The CVA™ Paramount V2 action is one of the more unique features of this muzzleloader. To create a tight seal to the VariFlame™ breech plug, CVA has designed and patented a unique bolt assembly. This new self-headspacing bolt is spring-loaded, which allows for a tight seal to the VariFlame adapters every time, to eliminate blowback. Additionally, this new bolt assembly comes apart without any tools and is incredibly easy to clean. The Paramount action is drilled and tapped for scope mounts, with a Remington 700 pattern, so mounts are easy to find. While the CVA™ Paramount V2 looks like a standard bolt action rifle, the action is very different and is not able to be converted to any centerfire gun, which allows this gun to be purchased without a 4473 in most states. In summary, the CVA Paramount Pro V2 muzzleloader is a high-performance muzzleloader that will reach out past 300 yards, with sub-MOA accuracy. This upgraded Pro model is just what western hunters and long-range shooters are looking for in a muzzleloader. The Paramount will ship with 15 PowerBelt™ ELR bullets, 10 VariFlame™ adapters, a VariFlame™ re-priming tool, breech plug wrench, fast-deploying ramrod, solid aluminum cleaning rod, and a Quake Sling with flush-cup mounts. Additionally, if you would like a custom scope mount package that is mounted and bore-sighted by our team, please reach out to our customer service department for more details. The CVA Paramount Muzzle Brake is recommended and can be purchased here: Paramount Muzzle Brake.