The CVA Micro-Adjust Long Range Peep Sight takes your long-range muzzleloader shooting to the next level. A game-changing solution for precision and adaptability in the field. Specifically designed for CVA™ Accura, Optima & Wolf models, this advanced sight set offers micro-adjustable windage and elevation with laser-etched markings, allowing for quick, accurate adjustments. Customize your experience by attaching a dope chart directly to the vertical elevation section for personalized shooting data at your fingertips. This set includes the versatile Williams Western front globe sight, featuring interchangeable reticle inserts with holdover points to suit various shooting scenarios. Large, easy-to-grip target knobs make on-the-fly adjustments effortless, while durable set screws lock everything securely in place for consistent performance. Perfect for hunters in states where magnified optics are not permitted during muzzleloader seasons, this non-magnified system delivers superior accuracy at ranges from 100 to 300 yards and beyond. Whether you're dialing in for the perfect shot or navigating the challenges of open-sight hunting, this innovative sight set is built to exceed expectations. Key Features: Micro-adjustable windage and elevation with precision laser-etched hash marks. Tailored for CVA™ Accura, Optima and Wolf muzzleloader models. Includes a non-magnified reticle system with interchangeable inserts. Large, ergonomic target knobs for smooth and precise adjustments. Williams Western front globe sight with versatile reticle options. Experience unmatched precision and reliability with a sight set that’s designed for serious hunters and long-range enthusiasts.

The Williams FP Receiver Sight is a top-tier choice for hunters and shooters seeking precision and durability. Engineered with micrometer adjustments featuring positive internal locks, this sight provides exceptional accuracy and reliability. Constructed from a rugged alloy with an impressive tensile strength of 85,000 pounds, the FP Receiver Sight is both robust and lightweight, weighing just 1.5 ounces. Designed for serious big game hunting, the FP Receiver Sight consistently outperforms other receiver sights on the market. Many modern rifles, including the CVA Accura series, are factory-drilled and tapped for seamless installation of this new FP sight. Features: Micro-adjustable windage and elevation controls. Rear peep sight with target knobs included. Compatible with the Williams Western Precision front globe sight or traditional front sights. With California, Colorado, Idaho, Oregon, Nevada, Washington as well as other states all requiring muzzleloading hunters to use open sights, this new sight is the perfect solution for those hunters looking to stretch their range. We recommend pairing this FP sight with any of the Williams Western Precision Series Globe Sights for optimal performance.

Take your long-range muzzleloader shooting to the next level with the Micro-Adjust Long Range Peep Sight Set—a game-changing solution for precision and adaptability in the field. Specifically designed for CVA Accura, Optima, and Wolf models, this advanced sight set offers micro-adjustable windage and elevation with laser-etched markings, allowing for quick, accurate adjustments. Customize your experience by attaching a dope chart directly to the vertical elevation section for personalized shooting data at your fingertips. This set includes the versatile Williams Western front globe sight, featuring interchangeable reticle inserts with holdover points to suit various shooting scenarios. Large, easy-to-grip target knobs make on-the-fly adjustments effortless, while durable set screws lock everything securely in place for consistent performance. Perfect for hunters in states where magnified optics are not permitted during muzzleloader seasons, this non-magnified system delivers superior accuracy at ranges from 100 to 300 yards and beyond. Whether you're dialing in for the perfect shot or navigating the challenges of open-sight hunting, this innovative sight set is built to exceed expectations. Key Features: Micro-adjustable windage and elevation with precision laser-etched hash marks. Tailored for CVA Accura, Optima, and Wolf muzzleloader models. Includes a non-magnified reticle system with interchangeable inserts. Large, ergonomic target knobs for smooth and precise adjustments. Williams Western front globe sight with versatile reticle options. Experience unmatched precision and reliability with a sight set that’s designed for serious hunters and long-range enthusiasts.

The Williams Western Precision Muzzleloading Sight insert will work in all of the Williams Western Precision Globe Sights. This particular model features a highly visible green fiber optic cord that has been made even smaller in diameter than the original insert to allow for better target acquisition at longer ranges. Along with better target acquisition, the fiber optic is much easier to see than standard inserts and is highly beneficial in low-light situations. Built with the hunter in mind this sight insert is a result of many requests by hunters in western states and is designed to offer greater versatility with the Williams Western Precision Sight Set system.

The Williams Western Precision Muzzleloading Sight insert will work in all of the Williams Western Precision Globe Sights. This particular model features a highly visible red fiber optic cord that has been made even smaller in diameter than the original insert to allow for better target acquisition at longer ranges. Along with better target acquisition, the fiber optic is much easier to see than standard inserts and is highly beneficial in low-light situations. Built with the hunter in mind this sight insert is a result of many requests by hunters in western states and is designed to offer greater versatility with the Williams Western Precision Sight Set system.

These Fiber Optic Pistol Sights are specifically designed to fit the CVA Optima™ V2 pistol. Get sighted in faster, no matter the lighting conditions. These fiber optic sights are the perfect complement to any CVA Optima Pistol. Williams™ Fiber Optic Sights give you the ultimate in visibility and durability. The front fiber optic and buckhorn rear sight combo helps you sight in and get on target, even in fading light or against a low-contrast background. All Williams® brand sights are machined with a durable metal housing!

The Traditions™ Peep Sight & Rail Combo offers unquestionable advantages and improvements over open sights. Made specifically for use with Traditions™ Muzzleloader Rifles, this receiver-mounted, metal aperture sight is optically superior to open sights in accuracy. The closer the aperture is to your eye, the faster you acquire your shot, obscuring much less of your target and the surrounding area. Plus this sight allows accurate, repeatable, wind and elevation adjustments. The Traditions™ Rail & Peep Sight provides the perfect solution for mounting optics and retaining iron sights. Machined to standard 1913 Picatinny rail specifications, the rail features cross slots for versatile mounting options, while at the same time, if something happens to your primary sighting option, you have backup peep aperture sight. Ideal for scopes, red dot sights and tactical optics. Sight your rifle in faster no matter what the configuration. Remove a huge amount of aiming error, and improve the focus of your sight by increasing your sight radius, plus eliminate rear light reflection. With Traditions™ Picatinny rail and peep sight, fits the Traditions™ Vortek, Pursuit and Buckstalker Models. ***Williams® Sights are fabricated from durable CNC machined metal.

The Williams™ CVA Peep Sight and Firesight set is fabricated for use on CVA ™ Wolf, Optima V2 and Accura X-Treme models. These low-profile, aluminum fiber optic sights are lightweight, yet built to stand up to the toughest weather conditions and are an excellent upgrade for compatible muzzleloaders. These Fiber Optic sights mount with two screws for the rear sight and a single screw for the front sight, allowing for easy self installation. Sight your CVA™ rifle in easier and faster with these Williams™ brand Firesights. The CVA® Williams™ Firesights are machined from durable, lightweight aluminum and feature positive wind and elevation locks. ***Williams® Sights are fabricated from durable CNC machined metal.

The Williams Western Precision Muzzleloading Sight Card Set comes with six (6) unique reticles to replace any broken or bent metallic sights. The sight cards contain certain reticles with precise hold-over points which allow shooters to use multiple yardages within one reticle. The Williams WPS Muzzleloader Sight is the ultimate sight setup for western hunters in states that do not allow scopes on muzzleloaders. With California, Colorado, Idaho, Oregon, Nevada, and Washington all requiring muzzleloading hunters to use open sights, this new sight set is the perfect solution for those hunters looking to stretch their range. There are several different reticles included in this pack, with the one that we like the most being a crosshair with an additional sub-tension line below, which gives you a reference point for additional yardages. There are also reticles included for a standard crosshair and several other popular globe sight reticles, but the new BDC-style reticle is the one we anticipate most hunters using. The bullet drop compensating reticle was designed with a 250-grain bullet and 110 grains of Blackhorn 209 powder. This load has been a standard load for use in the CVA Accura muzzleloaders, as well as the Traditions Vortek and Thompson/Center Triumph muzzleloaders. With this load and the Western Precision Sight set, we recommend zeroing at 100 yards with the main crosshair. This should put the next sub-tension dead-on at 175 yards, and the thick part of the crosshair at 200 yards. Because this may vary from gun to gun, we recommend testing these hold points for your muzzleloader, altitude, and load. We also believe there will be an advantage in sighting in at 50 yards with the main crosshair in certain applications. Built out of solid aluminum, the Williams Western Precision Muzzleloader Sights are durable and lightweight. These sights are easy to mount, sight in, and are sure to extend your muzzleloader range and increase accuracy. Included in the package are the required mounting screws, front globe sight, rear WGRS peep sight, and six reticle options.

The Williams Western Precision Muzzleloading Sight insert will work in all of the Williams Western Precision Globe Sights. This particular model features a highly visible red fiber optic cord that has been kept very small in diameter to allow for better target acquisition at longer ranges. Along with better target acquisition, the fiber optic is much easier to see than standard inserts and is highly beneficial in low-light situations. Built with the hunter in mind this sight insert is a result of many requests by hunters in western states and is designed to offer greater versatility with the Williams Western Precision Sight Set system.

The Williams Western Precision Muzzleloading Sight insert will work in all of the Williams Western Precision Globe Sights. This particular model features a highly visible green fiber optic cord that has been kept very small in diameter to allow for better target acquisition at longer ranges. Along with better target acquisition, the fiber optic is much easier to see than standard inserts and is highly beneficial in low-light situations. Built with the hunter in mind this sight insert is a result of many requests by hunters in western states and is designed to offer greater versatility with the Williams Western Precision Sight Set system.

Made for use on CVA muzzleloaders and rifles manufactured after 2001 - 2009. DuraSight makes it easy to mount the sights on compatible rifles with just two screws. Sight your rifle in faster no matter what the lighting conditions are. Durabright™ Fiber Optic Sights give you dramatically increased visibility and durability. Front and rear sight combo helps you sight in on target, even in fading light or against a low-contrast background. Guaranteed for life! ***These DuraBright® Fiber Optic Sights are made of a durable metal housing.

The Williams™ Western Precision Muzzleloading Globe Sight is the ultimate front globe sight for western hunters in states that do not allow scopes on muzzleloaders. The Precision Muzzleloading Sight includes a Williams Globe front sight as well as 6 different reticle inserts. While globe sights are nothing new to muzzleloading, this sight is a new model that attaches directly to the front of the barrel of modern inline muzzleloaders, without using any dovetail mounts or additional bases. The Williams™ Globe Front Sight attaches with one screw, directly to the barrel. With California, Colorado, Idaho, Oregon, Nevada, and Washington all requiring muzzleloading hunters to use open sights, this new sight set is the perfect solution for those hunters looking to stretch their range. There are several different reticles included in this pack, with the one that we like the most being a crosshair with an additional sub-tension line below, which gives you a reference point for additional yardages. There are also reticles included for a standard crosshair and several other popular globe sight reticles, but the new BDC-style reticle is the one we anticipate most hunters using. The bullet drop compensating reticle was designed with a 250-grain bullet and 110 grains of Blackhorn 209 powder. This load has been a standard load for us in the CVA™ Accura muzzleloaders, as well as the Traditions™ Vortek and Thompson/Center™ Triumph muzzleloaders. With this load and the Western Precision Sight set, we recommend zeroing at 100 yards with the main crosshair. This should put the next sub-tension dead-on at 175 yards, and the thick part of the crosshair at 200 yards. Because this may vary from gun to gun, we recommend testing these hold points for your muzzleloader, altitude, and load. We also believe there will be an advantage in sighting in at 50 yards with the main crosshair in certain applications. Built out of solid aluminum, the Williams™ Western Precision Muzzleloader Globe Sight is durable and lightweight. These sights are easy to mount, sight in, and are sure to extend your muzzleloader range and increase accuracy. Included in the package are the required mounting screws, front globe sight, and six reticle options. This listing is for the front globe sight ONLY. For the complete sight set please, CLICK HERE. ***This sight does NOT align with the stock peep sight that comes on the CVA Accura LR-X or MR-X muzzleloaders.

The Traditions™ Williams® Percision “Ace in the Hole” Scope Rail offers unquestionable advantages and improvements over open sights. Made specifically for use with Traditions™ Muzzleloader Rifles, this receiver-mounted, metal aperture sight is optically superior to open sights in accuracy. The closer the aperture is to your eye, the faster you acquire your shot, obscuring much less of your target and the surrounding area. Plus this sight allows accurate, repeatable, wind and elevation adjustments. Williams® “Ace in the Hole” Rail Sight™ provides the perfect solution for mounting optics and retaining iron sights. Machined to standard 1913 picatinny rail specifications, the rail features cross slots for versatile mounting options, while at the same time, if something happens to your primary sighting option, you have an “Ace in the Hole” backup aperture sight. Ideal for scopes, red dot sights and tactical optics, this 3/8 x .093 aperture peep sight accepts the Williams™ ghost ring aperture as well. Sight your rifle in faster no matter what the configuration. Remove a huge amount of aiming error, and improve the focus of your sight by increasing your sight radius, plus eliminate rear light reflection. With Traditions™ Williams® “Ace in the Hole”™ picatinny rail sight, a longer sight radius with faster target acquisition equals undoubtedly more accurate shooting. Model 623278 fits the Traditions™ Vortek, Pursuit and Buckstalker Models. ***Williams® Sights are fabricated from durable CNC machined metal.

The CVA™ Williams® Percision “Ace in the Hole” Scope Rail offers unquestionable advantages and improvements over open sights. Made specifically for use with CVA Muzzleloader Rifles, this receiver-mounted, metal aperture sight is optically superior to open sights in accuracy. The closer the aperture is to your eye, the faster you acquire your shot, obscuring much less of your target and the surrounding area. Plus this sight allows accurate, repeatable, wind and elevation adjustments. Williams® “Ace in the Hole” Rail Sight™ provides the perfect solution for mounting optics and retaining iron sights. Machined to standard 1913 picatinny rail specifications, the rail features cross slots for versatile mounting options, while at the same time, if something happens to your primary sighting option, you have an “Ace in the Hole” backup aperture sight. Ideal for scopes, red dot sights and tactical optics, this 3/8 x .093 aperture peep sight accepts the Williams™ ghost ring aperture as well. Sight your rifle in faster no matter what the configuration. Remove a huge amount of aiming error, and improve the focus of your sight by increasing your sight radius, plus eliminate rear light reflection. With CVA™ Williams® “Ace in the Hole”™ picatinny rail sight, a longer sight radius with faster target acquisition equals undoubtedly more accurate shooting. Model 679010 fits the CVA Buckhorn, Wolf, Optima, Accura and Apex Models. ***Williams® Sights are fabricated from durable CNC machined metal.

The Williams™ WGRS-CVA Optima Peep sight and firesight set is fabricated for use on CVA ™ Optima V1, Optima Pro, Kodiak, Kodiak Pro and Wolf models. It will also work well on the Optima V2, however, it is recommended to get a lower Williams front sight (model 70749) for best results. These low profile, aluminum fiber optic sights are lightweight, yet built to stand up to the toughest weather conditions and are an excellent upgrade for compatible muzzleloaders. These Fiber Optic sights mount with two screws for the rear sight and a single screw for the front sight, allowing for easy self installation. Sight your CVA™ rifle in easier and faster with these Williams™ brand Firesights. The CVA® Williams™ Firesights are machined from durable, lightweight aluminum and feature positive wind and elevation locks. ***Williams® Sights are fabricated from durable CNC machined metal.

The Williams™ WGOS-Remington post-2003 Firesight set is is fabricated for use on Remington 700 Muzzleloader Rifles manufactured after to 2003 . These firesights are the perfect compliment to any post-2003 Remington 700 Muzzleloader Rifle. The durable, low profile, aluminum fiber optic sights are lightweight, yet built to stand up to the toughest weather conditions. It is recommended that you have these sights installed by a gunsmith. Sight your Remington® rifle in easier and faster with these Williams™ brand fire sights. The Williams™ Fire Sights are machined from durable, lightweight aluminum and are guaranteed to provide greater visibility in low light situations. ***Williams® Sights are fabricated from durable CNC machined metal.

The Williams™ WGOS-Remington pre-2003 Firesight set is is fabricated for use on Remington 700 Muzzleloader Rifles manufactured prior to 2003 . These firesights are the perfect compliment to any pre-2003 Remington 700 Muzzleloader Rifle. The durable, low profile, aluminum fiber optic sights are lightweight, yet built to stand up to the toughest weather conditions. It is recommended that you have these sights installed by a gunsmith. Sight your Remington® rifle in easier and faster with these Williams™ brand fire sights. The Williams™ Fire Sights are machined from durable, lightweight aluminum and are guaranteed to provide greater visibility in low light situations. ***Williams® Sights are fabricated from durable CNC machined metal.

The Williams™ WGOS-CVA Firesight set is fabricated for use on CVA ™ Octagon Barrel Muzzleloader Rifles . The perfect compliment to any CVA® Muzzleloader Rifle, the durable, low profile, aluminum fiber optic sights are lightweight, yet built to stand up to the toughest weather conditions. These Fiber Optic sights mount with two screws for the rear sight and a dovetail groove for the front sight. It is recommended to have these sights installed by a gunsmith. Sight your CVA™ rifle in easier and faster with these Williams™ brand Firesights. The CVA® Williams™ Firesights are machined from durable, lightweight aluminum and feature positive wind and elevation locks. ***Williams® Sights are fabricated from durable CNC machined metal.

The Knight® Williams™ WGRS-Legend metal peep sight is fabricated for use on the Knight® Bighorn and Legend Muzzleloader Rifles as well as a number of other Knight rifles. The perfect compliment to traditional Knight™ rifles, the durable, low profile, rustproof peep sight is lightweight, yet built to stand up in the toughest weather conditions. Easy to mount to your rifle barrel with just two screws, or utilize the dovetail or existing screw holes on top of your receiver for quick installation. Sight your rifle in easier and faster with the compact, low profile peep sight. The Knight® Williams™ WGRS sight is machined from durable, lightweight aluminum and feature positive wind and elevation locks. Peep sight fits Knight Bighorn, Legend, Revolution, Vision, Wolverine, Rolling Block and American Rifles. ***Williams® Sights are fabricated from durable CNC machined metal.

The Williams™ FP-Knight® Peep Sight with target knobs offers a compact, low profile design that is durable, lightweight and weather resistant. The sight is fabricated as the perfect compliment to most Knight® Inline Muzzleloader Rifles thanks to its lightweight, rustproof aluminum alloy that embodies the strength of metal, allowing it to stand up in the harshest weather conditions. The intelligently designed target knobs allow for quick and precise adjustments without the need to bring additional tools to the range or field. With the integrated target knobs, you can simply click the adjustments with your fingers just as you would with a scope turret. Easy to mount to your rifle barrel with just two screws, the sight is fully adjustable for wind and elevation featuring internal micrometer adjustments that lock positively to prevent accidental movement of sight settings. The sight is sub-blocked and offers no obstructions to impair or blot out the shooter’s field of vision. For hunters in need of an open sight, the Williams™ FP-Knight peep sight is a must-have accessory for your Knight® muzzleloader. ***Williams® Sights are fabricated from durable CNC machined metal.

Williams™ FP-Knight® Peep Sight offers a compact, low profile design that is durable, lightweight and weather resistant. The sight is fabricated as the perfect compliment to most Knight® Inline Muzzleloader Rifles thanks to its lightweight, rustproof aluminum alloy that embodies the strength of metal, allowing it to stand up in the harshest weather conditions. Easy to mount to your rifle barrel with just two screws, the sight is fully adjustable for wind and elevation featuring internal micrometer adjustments that lock positively to prevent accidental movement of sight settings. The sight is sub-blocked and offers no obstructions to impair or blot out the shooter’s field of vision. For hunters in need of an open sight, the Williams™ FP-Knight peep sight is a must-have accessory for your Knight® muzzleloader. ***Williams® Sights are fabricated from durable CNC machined metal.

The Williams™ FP-Thompson/Center Encore & Omega metal peep sight is fabricated for use on the T/C® Encore and Omega series muzzleloader rifles. The perfect compliment to Thompson Center™ inline muzzleloader rifles, the durable, low profile, rustproof peep sight is lightweight, yet built to stand up in the toughest weather conditions. The intelligently designed target knobs allow for quick and precise adjustments without the need to bring additional tools to the range or field. With the integrated target knobs, you can simply click the adjustments with your fingers just as you would with a scope turret. Easy to mount to your rifle barrel with just two screws, the Williams™ FP Encore/Omega peep sight is machined from durable, lightweight aluminum and features positive wind and elevation locks. Sight will fit Thompson Center™ Encore and Omega muzzleloader rifles. ***Williams® Sights are fabricated from durable CNC machined metal.

The Williams™ FP-T/C Encore & Omega metal peep sight is fabricated for use on the T/C® Encore and Omega series muzzleloader rifles. The perfect compliment to Thompson Center™ inline muzzleloader rifles, the durable, low profile, rustproof peep sight is lightweight, yet built to stand up in the toughest weather conditions. Easy to mount to your rifle barrel with just two screws, the Williams™ FP Encore/Omega peep sight is machined from durable, lightweight aluminum and features positive wind and elevation locks. The Peep Sight will fit Thompson/Center™ Encore and Omega muzzleloader rifles. ***Williams® Sights are fabricated from durable CNC machined metal.