Traditions™ NitroFire VAPR Rifle Burris™ Scope Combo - .50 Cal Realtree™ Edge & Cerakote - CR5-841104421BFC
The Traditions® NitroFire™ VAPR comes with a 3-9x40mm bore-sighted Burris™ Fullfield E1 Muzzleloader scope and a durable 48" soft rifle case.
The Traditions® NitroFire™ VAPR Muzzleloader is a completely new and revolutionary gun. This muzzleloader utilizes the Federal® FireStick™ system, which takes the guesswork out of muzzleloading, and increases safety and simplicity. The NitroFire muzzleloader is a great gun for beginners and experienced shooters alike. The Nitrofire VAPR™ muzzleloader comes with a 1:24" fast twist barrel that is engineered to properly stabilize the high BC muzzleloading bullets used in many modern muzzleloaders. This .50 caliber muzzleloader is one of the easiest to load, requires the least equipment and accessories, and is incredibly accurate.
This Traditions™ NitroFire VAPR muzzleloader features a Realtree Edge™ camo synthetic stock, with a 26” fluted chromoly barrel with a silver CeraKote™ finish. The barrel is drilled and tapped for both open sights and scope mounts for convenience and compliance with all state laws. As with many Traditions muzzleloaders, the NitroFire VAPR features a trigger safety, as well as a hammer safety, allowing for a dual safety system. Additionally, these guns come equipped with the Elite XT™ trigger system, which provides better accuracy and consistency for all shooters. This gun is built to be lightweight, maneuverable, accurate, and safe.
The Traditions NitroFire VAPR Scope Combo comes with a 3-9x40mm bore-sighted Burris™ Fullfield E1 Muzzleloader scope and a durable 48" soft or hard rifle case. The Burris™ Fullfield E1 Scope was designed specifically for muzzleloaders and features the Burris™ Ballistic Plex Reticle. This reticle offers hold points for various yardages, depending on your specific caliber. This feature has become a staple in many lineups, as it offers the hunter a specific hold point for yardages, instead of guessing at holdover or having to dial the elevation knob to the correct distance. This FullField E1™ Muzzleloader Scope comes in a matte black finish, with a 1-inch main tube.
The barrel of this new muzzleloader is where all of the patented technology is held. The breech of the NitroFire VAPR is built to only accept the Federal Firestick, while still only allowing the bullet to be loaded from the muzzle. One of the best things about this muzzleloader is the complete removal of a breech plug of any kind. This dramatically reduces cleaning, as well as reducing the possibility of hangfires or misfires. The breech of the NitroFire VAPR allows for the use of the FireStick, but has a shelf that the bullet rests on, which allows for confident and easy loading.
The Federal™ FireStick is a vital component to this groundbreaking new muzzleloader. The FireStick is a plastic capsule that holds pre-measured powder charges. The ability to have identical charges on every shot allows for a more consistent velocity spread, which increases accuracy and dependability. Since the FireSticks are only used once, there is no real cleaning involved in the breech area, which speeds up reloading as well. The new technology in the Traditions NitroFire reduces the need for many common accessories, which makes it much easier for beginners to get into the sport. Powder measures, powder flasks, nipple picks, speed loaders, cappers, parts soakers, and granular or pelletized powders are not needed with this muzzleloader, which can save hunters lots of money when they are first getting into muzzleloading. With this new muzzleloader, all you’ll need to carry in the field are a couple primers, bullet, FireSticks, and a bullet starter!
The all-new Traditions NitroFire VAPR is a great muzzleloader for the entry-level or casual muzzleloading enthusiast. With this muzzleloader, all you’ll need is to choose your preferred scope or sights, grab some Federal™ FireSticks, bullets, and primers, and head to the range!