Replacement barrel locking pin for the Pietta 1851 Navy & 1860/61 Army & Sherrif black powder revolvers. Pietta part number 525.

Replacement cylinder safety pin for the Pietta 1860/61 Army & Sheriff black powder revolvers. Pietta part number P1773 .

Replacement grip screw for the Pietta 1858 New Army black powder revolvers. Pietta part number 454 .

Replacement hammer screw for the Pietta 1860/61 Army & Sheriff black powder revolvers. Pietta part number 381 .

Replacement loading lever screw for the Pietta 1858 New Army black powder revolvers. This part includes the screw and ring. Pietta part number 448.

Replacement plunger pin (rammer pin) for the Pietta 1858 New Army black powder revolvers. Pietta part number 730 .

Replacement shoulder stock retainer screw for the Pietta 1860/61 Army & Sheriff black powder revolvers. Pietta part number 1740 .

Replacement threaded grip nut for the Pietta 1858 New Army black powder revolvers. Pietta part number 455 .

Replacement trigger screw for the Pietta 1858 New Army black powder revolvers. Pietta part number 451 .

The Muzzle-Loaders.com™ .50 cal bullet puller quickly removes bullets or balls stuck in the bore of your barrel. This puller fits all standard CVA, Traditions, Knight, Lyman & Thompson/Center ramrods with 10/32 threading. The bullet puller is designed to be used with .50 caliber and larger rifles or pistols. The Muzzle-Loaders bullet puller is a must for every muzzleloader. The solid brass bullet puller fits most ramrods with 10-32 threading. HOW TO USE: 1. Thread the bullet puller onto a ramrod. 2. Slide the bullet puller and ramrod into the barrel until the screw tip contacts the projectile. 3. Rotate the ramrod slowly clockwise tapping lightly on the end of the rod with a hammer allowing the puller screw to thread into the projectile. 4. Once the puller is screwed into the projectile, pull up on the ramrod extracting the projectile. 5. Once the projectile is removed, clean the bore to remove any fouling or particles. NOTE: If puller comes free from projectile, continue to repeat the procedure. This may occur especially in fouled bores.

The Muzzle-Loaders.com™ Loading Tip makes loading any type of bullet into your high performance muzzleloader easier. The Bullet Loading Jag was designed to fit any ramrod with a 10-32 thread, this brass ramrod accessory helps you easily load all types of black powder projectiles. The Loading Tip's concave design prevents damage to your polymer tip bullets and easily loads standard and hollow point bullets, as well as round balls. The Muzzle-Loaders™ Loading Jag makes it easy to load all types of black powder projectiles from standard, polymer tip, and hollow point bullets, as well as round balls. The Jag is made to fit all ramrods with 10-32 thread. HOW TO USE: 1. Thread onto any ramrod with compatible 10/32 threads. 2. Place concave end over the top of the projectile. 3. Push projectile down bore until properly seated against the powder charge. 4. Remove ramrod with attached loading tip from the barrel. ***Always use caution when loading a firearm. NEVER leave a ramrod in the barrel of any firearm after loading procedure has been completed.

#html-body [data-pb-style=UNVIP5H]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}#html-body [data-pb-style=UNVIP5H],#html-body [data-pb-style=YDHSLHP]{border-style:none;border-width:1px;border-radius:0;margin:0;padding:0} The Muzzle-Loaders.com™ .40 Caliber Brass Bore Brush is made to fit all .40 caliber rifle and pistol barrels. The wire brush is made from non-sparking brass for quick and easy cleaning of your bore. The .40 caliber brass bore brush threads directly onto your ramrod or range rod for easy use. The Muzzle-Loaders.com™ Wire Bore Brush is all you need to make cleaning your muzzleloader a breeze. *Designed for .40 Caliber Muzzleloaders

The CVA™ Muzzleloader Cotton Bore Swab is designed to oil your rifle’s bore or to apply Bore Butter as a seasoning agent. The 100% cotton swab is furry soft, yet durable with 10-32 threading that will fit most ramrods on the market. The CVA™ Cotton Bore Swab is the tool of choice for cleaning and seasoning your .50 caliber Muzzleloader barrel. Your Muzzleloading cleaning chores just got easier. ***Always use caution when loading firearm

The CVA™ Muzzleloader Cotton Bore Swab is designed to oil your rifle’s bore or to apply Bore Butter as a seasoning agent. The 100% cotton swab is furry soft, yet durable with 10-32 threading that will fit most ramrods on the market. The CVA™ Cotton Bore Swab is the tool of choice for cleaning and seasoning your .54 caliber Muzzleloader barrel. Your Muzzleloading cleaning chores just got easier. ***Always use caution when loading firearm

#html-body [data-pb-style=XBVHVE7]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}#html-body [data-pb-style=G2LWAPN],#html-body [data-pb-style=XBVHVE7]{border-style:none;border-width:1px;border-radius:0;margin:0;padding:0} The CVA™ Brass Bore Brush is made to fit all .40 caliber rifle and pistol barrels. The wire brush is made from non-sparking brass for quick and easy cleaning of your bore. The .40 caliber brass bore brush threads directly onto your ramrod or range rod for easy use. The CVA™ Wire Bore Brush is all you need to make cleaning your muzzleloader a breeze. *Designed for .40 Caliber Muzzleloaders

#html-body [data-pb-style=B6P4AAL]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}#html-body [data-pb-style=B6P4AAL],#html-body [data-pb-style=RJ6MESN]{border-style:none;border-width:1px;border-radius:0;margin:0;padding:0} The CVA™ Brass Bore Brush is made to fit all .45 caliber rifle and pistol barrels. The wire brush is made from non-sparking brass for quick and easy cleaning of your bore. The .45 caliber brass bore brush threads directly onto your ramrod or range rod for easy use. The CVA™ Wire Bore Brush is all you need to make cleaning your muzzleloader a breeze. *Designed for .45 Caliber Muzzleloaders

The CVA™ Brass Bore Brush is made to fit all .50 caliber rifle and pistol barrels. The wire brush is made from non-sparking brass for quick and easy cleaning of your bore. The .50 caliber brass bore brush threads directly onto your ramrod or range rod for easy use. The CVA™ Wire Bore Brush is all you need to make cleaning your muzzleloader a breeze. *Designed for .50 Caliber Muzzleloaders

The CVA™ Brass Bore Brush is made to fit all .54 caliber rifle and pistol barrels. The wire brush is made from non-sparking brass for quick and easy cleaning of your bore. The .54 caliber brass bore brush threads directly onto your ramrod or range rod for easy use. The CVA™ Wire Bore Brush is all you need to make cleaning your muzzleloader a breeze. *Designed for .54 Caliber Muzzleloaders

The CVA™ bullet puller quickly removes bullets or balls stuck in the bore of your barrel. This puller fits all standard CVA ramrods with 10/32 threading. The bullet puller is designed to be used with .50 caliber and larger rifles or pistols. CVA's bullet puller is a must for every muzzleloader. The solid brass bullet puller fits most ramrods with 10-32 threading.

Make loading any type of bullet into your high performance muzzleloader easier with the CVA® Universal Ramrod Loading Tip. Designed to fit any ramrod with a 10-32 thread, this brass ramrod accessory helps you easily load all types of black powder projectiles. The concave tip design prevents damage to your polymer tip bullets and easily loads standard and hollow point bullets, as well as round balls. Makes it easy to load all types of black powder projectiles Concave tip - Handles standard, polymer tip, and hollow point bullets, as well as round balls Fits all ramrods with 10-32 thread Loads polymer tips without damaging tip Brass construction.

The Muzzle-Loaders™ .32 cal bullet puller quickly removes bullets or balls stuck in the bore of your barrel. This puller fits all standard CVA, Traditions, Knight, Lyman & Thompson/Center ramrods with 10/32 threading. The bullet puller is designed to be used with .32 caliber and larger rifles or pistols. The Muzzle-Loaders™ bullet puller is a must for every muzzleloader. The solid brass bullet puller fits most ramrods with 10-32 threading. HOW TO USE: 1. Thread the bullet puller onto a ramrod. 2. Slide the bullet puller and ramrod into the barrel until the screw tip contacts the projectile. 3. Rotate the ramrod slowly clockwise tapping lightly on the end of the rod with a hammer allowing the puller screw to thread into the projectile. 4. Once the puller is screwed into the projectile, pull up on the ramrod extracting the projectile. 5. Once the projectile is removed, clean the bore to remove any fouling or particles. NOTE: If puller comes free from projectile, continue to repeat the procedure. This may occur especially in fouled bores.

#html-body [data-pb-style=FAR8JSV]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}#html-body [data-pb-style=CVRN769],#html-body [data-pb-style=FAR8JSV]{border-style:none;border-width:1px;border-radius:0;margin:0;padding:0} Muzzle-Loaders.com™ .40 Caliber Cotton Bore Cleaning Swab is designed to oil your rifle’s bore or to apply a barrel seasoning agent. The muzzleloader bore swab is designed to fit .40 caliber barrels. The 100% cotton swabs are furry soft, yet durable with 10-32 threading that will fit most ramrods on the market. The Muzzle-Loaders™ Cotton Bore Swabs are the tool of choice for cleaning and seasoning your .40 caliber muzzleloader barrel. Your muzzleloading cleaning chores just got easier. **Always use caution when loading a firearm HOW TO USE: 1. Thread the bore swab onto a ramrod. 2. Slide the bore swab and ramrod into the barrel. 3. Run bore swab down the entire length of the barrel and back up. 4. Repeat step 3 until the bore is free of powder residue and debris. NOTE: We recommend using the bore swab after using a brass bore brush and cleaning patch to remove heavy fouling & residue.

Pietta replacement hammer roller for the Pietta 1851/60/61/62 Army & Navy black powder revolvers. Pietta part number 3423 .

Pietta replacement hammer screw for 1858 New Model Army/Navy black powder revolvers. Pietta part number 453 .