3-Pack of Muzzle-Loaders™ Cotton Bore Swabs designed to oil your rifle’s bore or to apply Natural Lube 1000 Plus™ Bore Butter as a seasoning agent. The muzzleloader bore swab is designed to fit .32 caliber barrels. The 100% cotton swabs are furry soft, yet durable with 10-32 threading that will fit most ramrods on the market. The Muzzleloader.com™ Cotton Bore Swabs are the tool of choice for cleaning and seasoning your .32 caliber Muzzleloader barrel. Your Muzzleloading cleaning chores just got easier. HOW TO USE: 1. Thread the bore swab onto a ramrod. 2. Slide the bore swab and ramrod into the barrel. 3. Run bore swab down the entire length of the barrel and back up. 4. Repeat step 3 until the bore is free of powder residue and debris. NOTE: We recommend using the bore swab after using a brass bore brush and cleaning patch to remove heavy fouling & residue. **Always use caution when cleaning a firearm
3-Pack of Muzzle-Loaders™ Cotton Bore Swabs designed to oil your rifle’s bore or to apply Natural Lube 1000 Plus™ Bore Butter as a seasoning agent. The muzzleloader bore swab is designed to fit .45 caliber barrels. The 100% cotton swabs are furry soft, yet durable with 10-32 threading that will fit most ramrods on the market. The Muzzle-Loaders™ Cotton Bore Swabs are the tool of choice for cleaning and seasoning your .45 caliber Muzzleloader barrel. Your Muzzleloading cleaning chores just got easier. **Always use caution when loading a firearm HOW TO USE: 1. Thread the bore swab onto a ramrod. 2. Slide the bore swab and ramrod into the barrel. 3. Run bore swab down the entire length of the barrel and back up. 4. Repeat step 3 until the bore is free of powder residue and debris. NOTE: We recommend using the bore swab after using a brass bore brush and cleaning patch to remove heavy fouling & residue.
3-Pack of Muzzle-Loaders™ Cotton Bore Swabs designed to oil your rifle’s bore or to apply Natural Lube 1000 Plus™ Bore Butter as a seasoning agent. The muzzleloader bore swab is designed to fit .54 caliber barrels. The 100% cotton swabs are furry soft, yet durable with 10-32 threading that will fit most ramrods on the market. The Muzzle-Loaders™ Cotton Bore Swabs are the tool of choice for cleaning and seasoning your .54 caliber Muzzleloader barrel. Your Muzzleloading cleaning chores just got easier. **Always use caution when loading firearm HOW TO USE: 1. Thread the bore swab onto a ramrod. 2. Slide the bore swab and ramrod into the barrel. 3. Run bore swab down the entire length of the barrel and back up. 4. Repeat step 3 until the bore is free of powder residue and debris. NOTE: We recommend using the bore swab after using a brass bore brush and cleaning patch to remove heavy fouling & residue.
Muzzle-Loaders English and French Musket Flints are ideally suited for use in large-caliber muskets with larger sidelock mechanisms. These flints are authentically hand knapped and are composed of high quality sparking flint for reliable ignitions on every strike. The authentic shape and design are perfect for use in reenactments as well as general everyday shooting and hunting use. To load a flint simply wrap the flint in a piece of leather and place the flint and leather between the jaws of the hammer. Gently tighten down the top jaw of the hammer until the flint is firmly clamped in place. To get the best performance out of the flints ensure that the striking edge makes perpendicular contact with the frizzen upon firing. Additionally ensure the leather piece is not interfering with the striking edge of the flint, trim the leather piece if needed. This flint pack comes with 2 authentic flints and we recommend carrying the extra as a spare when heading out to the field as it is always a good idea to have a spare flint on any shooting or hunting outing.
Muzzle-Loaders English and French Standard Flints are ideally suited for use in traditional flintlock muzzleloaders. These flints are authentically hand knapped and are composed of high quality sparking flint for reliable ignitions on every strike. The authentic shape and design are perfect for use in reenactments as well as general everyday shooting and hunting use. To load a flint simply wrap the flint in a piece of leather and place the flint and leather between the jaws of the hammer. Gently tighten down the top jaw of the hammer until the flint is firmly clamped in place. To get the best performance out of the flints ensure that the striking edge makes perpendicular contact with the frizzen upon firing. Additionally ensure the leather piece is not interfering with the striking edge of the flint, trim the leather piece if needed. This flint pack comes with 3 authentic flints and we recommend carrying the extras as a spare when heading out to the field as it is always a good idea to have spare flints on any shooting or hunting outing.
The Muzzle-Loaders™ Black Powder Revolver extension handle is designed to fit most black powder revolvers. The extension handle allows you extra leverage when loading your revolver and helps you avoid gouged palms and skinned knuckles. The revolver extension handle fits most 1851, 1860, 1873 Colts & 1858 Remington revolvers. The extension handle will not fit Walker or Dragoon revolver models. No more gouged palms Provides extra leverage Machined from solid aircraft aluminum Designed to fit both narrow and wider loading lever ribs Shallow channel designed to fit pocket revolvers Fits Most but not all revolvers (can easily be modified to fit yours) Will not work on Walker or Dragoon models
The Muzzle-Loaders™ Black Powder Revolver Loading Stand is designed to fit .36 and .44 caliber revolver cylinders. The Pistol Loading Stand allows for easy loading of the chambers of any cylinder when removed from the pistol. The Loading Stand fits all 1851, 1860, 1873 Colts and 1858 Remington revolvers. The stand comes with an additional spacer for cylinders with larger diameter holes. HOW TO USE: 1. Easy to use, simply screw the proper caliber jag onto the loading arm screw and the stand is ready to use 2. Load the desired powder charge and wad to the pistol cylinder. 3. Place the projectile over the cylinder hole and press the projectile down on top of the charge. 4. If needed, add wading on top of the projectile to keep it from falling out of the barrel.
Muzzle-Loaders® Black Powder Revolver Nipples are designed exclusively for Pietta™ revolvers with a 6x3/4 thread pitch. These Stainless Steel percussion cap nipples are manufactured from high-grade steel for extended use. Muzzle-Loaders™ offers these revolver nipples in a 6-pack for added value so you can have a few spare revolver nipples on hand when you need them. Muzzle-loaders™ Black Powder Revolver Nipples are great for replacing worn nipples. Muzzle-Loaders® Percussion Nipples are designed exclusively for Pietta revolvers with 6 x 3/4 threading. Features Spare or replacement nipples Compatible with all Pietta™ black powder revolvers Stainless steel construction Nipples work with the following Caps ( Standard or Magnum ) Remington #10 CCI #11 Winchester #11 RWS 1075 Nipples fit the following caliber revolvers 36 Caliber 44 Caliber 45 Caliber Nipples work on the following Models 1851 thru 1861 ( Pietta, O riginal Colt or 2nd Gen Colt ) 1862 Dance by Pietta LeMat by Pietta
The Muzzle-Loaders Charge Tube Case offers shooters a convenient storage system for powder tubes. The case is made from a tough hard nylon exterior shell and features a soft foam interior spacer that holds up to 20 powder charge tubes. Additionally, t his case features a sturdy zipper for securing the opening on the case. Our products are made from quality materials that are built to last and offer real value to your black powder shooting experience.
The Muzzle-Loaders Blackhorn Muzzleloader Charge Tube Package offers shooters a convenient storage system for powder tubes. The sturdy EVA foam case is made from a tough hard nylon exterior shell and features a soft foam interior spacer that holds up to 20 powder charge tubes. Additionally, t his case features a sturdy zipper for securing the opening on the case. Our products are made from quality materials that are built to last and offer real value to your black powder shooting experience. The package comes with a case and 20 Muzzle-Loaders 160-grain charge tubes.
The Powerbelt ELR Loading Jag is designed specifically for use with the Powerbelt ELR .40, .45 & .50 caliber bullets. The extended ballistic tip of the ELR bullet requires a loading tip with a deeper recess to ensure proper alignment and to protect the ballistic tip from being crushed during loading. The ELR loading jag serves both of these functions and is highly recommended for anyone shooting ELR bullets out of any .40 through .50 caliber rifle. The ELR loading jag is milled out of brass to ensure the barrel of any muzzleloader does not get scratched when using the loading tip. Additionally, the loading tip features 10/32 threads so it can be used with most ramrods and bullet starters on the market today. When it comes to accuracy proper alignment and ballistic integrity of the bullet is absolutely vital. The Powerbelt ELR Loading Jag is the right tool for use with ELR bullets in any application. Ensure you are ready for trips afield and at the range with the ELR Loading Jag.
The Muzzle-Loaders CVA Paramount 20MOA Picatinny Scope Rail was designed to give stability and precision to long-range muzzleloader shooters. Besides being the go to rail for the Remington 700 UML, this base also fits the CVA Paramount and CVA Paramount Pro rifles. The 20 MOA Picatinny Style Base allows you to be sure that your rifle scope will stay in place, every time. The Remington 700 Short Action Picatinny Rail is machined from High-Quality 6063 T6 Aircraft-Grade Aluminum that is engineered to handle even the highest recoil rifles. At Muzzle-Loaders.com our goal is to provide quality products, at an affordable price for our customers. When designing this base, we wanted a high-quality rail that would stand up to the elements, as well as high recoil, precision muzzleloaders. After testing we feel that this base is one of the strongest on the market and is a great option for any shooter. The rail is 20MOA meaning the base is canted down in the front toward the barrel. By canting the base down in the front, this is what allows for more usable elevation adjustment in the scope. To help explain how this works, please take a look at the illustration below. If we had a rifle with a 0MOA base, and there was a laser going through the middle of the scope, and the middle of the rifle bore that went forever, and lets say the rifle was zeroed at 100 yards, those 2 lasers would intersect at that 100 yard target. If we then changed to a 20MOA base, the scopes laser would be on target, and the rifles laser would be hitting the target 20 inches high. This is essentially how a 20MOA base works, since you are now hitting 20 inches high, you can dial the scope back so the rifle is zeroed at 100 yards again, and you have an extra 20 inches of elevation to work with. This rail is designed to fit the Remington 700 UML, CVA Paramount, CVA Paramount Pro and all Remington 700 Short-Action rifles. Also, all Muzzle-Loaders.com rails carry a Lifetime Warranty.
The Quick Peep Mounting System is designed to fit all CVA™ Wolf, Optima & Accura rifles. The mounting system combines innovative design with exceptional heavyweight materials to give you the finest market value in rings and bases on the market. Making tack-driving accuracy available to all sportsmen, the see-thru system allows you to use either your scope or fiber optic sights when shooting. The mounting system uses a heavy-duty alloy rail that can accommodate many after market rings. The molded see-thru scope rings ensure essential alignment to grip your scope tighter, with less stress on the scope tube. As every serious hunter and shooter knows, scope mounts are the critical link between a firearm and its optics – and sacrificing quality here can virtually destroy a rifle’s potential for accuracy. ***Accommodates most 40mm objective scopes and under.
The Muzzle-Loaders.com™ Breech Plug Brush Kit includes the two essential brushes needed to help clean your inline breech plug and fire channel. The smaller fire channel brush helps to clean out breech plug fouling from the communication hole and eliminate obstructions in the fire channel. The larger nylon breech brush gives you the ability to clean the threads inside the receiver and barrel as well as the exterior of your breech plug.
The Investarm Deer Stalker Replacement Ramrod is made from solid aluminum and makes reloading and cleaning your muzzleloader a breeze. The Replacement ramrod consists of a solid aluminum rod with a special jag on one end that is threaded. The rod can be removed quickly for loading a second shot. The Replacement ramrod is 10-32 threaded on both ends making it ideal for attaching modern loading and cleaning jags. This ramrod will also fit the Lyman Deerstalker muzzleloaders.
The Muzzle-Loaders™ Blackhorn™ 209 Powder Charge Tubes are the simple solution for keeping your Blackhorn Powder ready to load quickly and effortlessly in the field or at the range. The magnum powder tubes hold up to 160 grains of Blackhorn 209™ or other loose black powder, and come with a 20 to 160 grain unit volumetric measurement on the side of the see-through, durable plastic tube to indicate how much powder is in each tube. The Muzzle-Loaders Charge Tubes make loading your rifle or preparing your load quick and easy. These tubes are great for preparing loads in advance for follow-up shooting, or for speed loading during a match. The Blackhorn™ Tubes are made of heavy plastic and come in packs of 5, 10, 15 & 20 tubes. These tubes will not crush with normal use and come with a tight-fitting lid. Gear up for your hunting season or range trip with the magnum BH209 charge loading tubes. ***IMPORTANT*** DO NOT USE THESE TUBES TO MEASURE POWDER CHARGES. THE MARKINGS ARE NOT A PRECISION MEASUREMENT AND ARE ONLY TO BE USED AS A GENERAL REFERENCE.
The Muzzle-Loaders™ 2" Round Cotton Cleaning Patches are designed speciically for muzzleloaders. These patches will fit .36 to .58 caliber rifle or pistol bores and come in a package of 1000 patches. These two-inch cotton cleaning patches are made for cleaning your muzzleloader, not for shooting. They fit perfectly over any cleaning jag and make cleaning your barrel a breeze. *Not to be used as a ball patch. HOW TO USE: 1. Place one patch over the muzzle with solvent applied or as a dry patch. 2. Place cleaning jag attached to a ramrod in the center of the patch. 3. Push cleaning patch through the bore to the breech area of the rifle. 4. Remove patch from the bore. Repeat the process until the bore is free of all powder residue and any other fouling.
The Muzzle-Loaders.com™ See-Thru 209 Capper Tool is the ultimate tool for shooters using modern inline 209 primer ignition muzzleloaders. The see-thru capper tool is designed specifically for use with Strike-Fire or Scoped Rifles. The 209 capper's rectangular tube eliminates problems with tipped and jammed caps, and the see-thru design allows quick visual inspection of your cap reserves. The See-Thru Capper is spring-loaded and has a capacity of up to eight (8) 209 shotshell primers, which makes for quick, easy loading in the field or at the range.
The Muzzle-Loaders Antler Pan Brush is a perfect accessory for flintlock shooters with a nice antler handle to make it more aesthetically pleasing. This is a simple flintlock shooters tool that is handy to keep on hand in your possibles bag or field bag. The antler handle makes for a nicer looking brush than the typical wire handled variation and allows for a more authentic feeling experience. This antler pan brush is hand crafted in the United States by October Country Muzzleloading.
The Muzzle-Loaders.com™ Antler T-Handle Bullet Starter is the perfect bullet starter for any situation. The starter comes with a beautifully crafted antler handle and will accommodate any bullet including ballistic tipped conical bullets, hollow point bullets and round balls. The starter is designed to ensure that you will get years of use out of the bullet starter and can be assured that it will perform in any weather. When it comes to accuracy proper alignment of the projectile is of the utmost importance. With the Muzzle-Loaders Antler T-Handle Bullet Starter, you can be confident that each projectile will be properly aligned to ensure maximum accuracy. The Muzzle-Loaders team is dedicated to providing our customers with high quality and affordable muzzleloading equipment. Ensure you are ready for your upcoming muzzleloader hunt or shoot with our Antler T-Handle Bullet Starter. HOW TO USE: 1. Place the projectile so that the tip engages the projectile. 2. Place the bullet starter with the adapter tip over the projectile so that the tip engages the projectile. 3. Press the handle to start the bullet into the barrel. 4. Use the long starter to push the projectile further down the barrel. 5. Use the ramrod to fully seat the projectile against the powder charge. ***Ensure the muzzleloader is unloaded before loading. Never lean over or stand in front of the muzzle at any time. Always ensure the projectile is firmly seated against the powder charge when loading.
Muzzle-Loaders Blanket Rifle & Pistol Covers. Hand crafted in the United States by October Country Muzzleloading with the finest horse blanket material and meticulously lined with heavy canvas for unparalleled durability and protection. Designed to stand out with its unique blend of ruggedness and style, this cover is your reliable companion to keep your muzzleloader or revolver in perfect condition. With a distinctive appeal, the Muzzle-Loaders Blanket Cover is not only a practical choice but also aesthetically pleasing. Available in three size options to ensure a perfect fit for your rifle or pistol: For pistols choose the 20" cover. For rifles up to 47" long, choose the 54" cover. For rifles up to 57" long, choose the 64" cover. Accentuated with leather trim, the color of which may vary based on availability, these rifle covers exude a blend of sophistication and functionality. Trust in its robust construction to safeguard your prized possession while adding a touch of distinction to your outdoor pursuits. IMPORTANT NOTE: The Muzzle-Loaders Blanket Rifle & Pistol Covers come in various colors as can be seen in the images. If you want a specific color you can call in to our customer service team at 1-855-236-5000 and request a color. We will do our best to accommodate your request. Otherwise you will get whatever color is available at the time your order is placed.
The Muzzle-Loaders.com™ Brass Bore Brushes are made to fit all .50 caliber rifle and pistol barrels. The wire brushes are made from non-sparking brass for quick and easy cleaning of your bore. The .50 caliber brass bore brush threads directly onto your ramrod or range rod for easy use. The Muzzle-Loaders Wire Bore Brushes are all you need to make cleaning your muzzleloader a breeze. 3 Pack. *Designed for .50 Caliber Muzzleloaders HOW TO USE: 1. Thread the brass bore brush onto a ramrod. 2. Slide the brass bore brush and ramrod into the barrel. 3. Run the brass bore brush down the entire length of the barrel stopping short of the breech plug threads. 4. Pull the ramrod and brass bore brush back up the length of the barrel. 5. Repeat steps 3 and 4 until powder residue and barrel fouling have been sufficiently broken up. NOTE: For best results, we recommend following this procedure by using a solvent and cleaning patches then a cotton bore swab. ***Always use caution when cleaning a firearm
The Muzzle-Loaders™ Brass Cleaning and Loading Jag is all you need to make cleaning or loading your muzzleloader a breeze. The .32 caliber cleaning/loading jag comes with male and female 10-32 threads, that will fit most ramrods on the market. The Muzzle-Loaders™ brass cleaning jag secures snugly to the end of your ramrod, making cleaning the full length of your barrel easy and efficient. *Fits .32 Caliber Rifles & Pistols HOW TO USE: Loading 1. Thread the brass cleaning & loading jag onto a ramrod. 2. Place the brass cleaning & loading jag over the end of the projectile. 3. Push ramrod down the bore until the projectile contacts the powder charge. 4. Give ramrod a good tap to ensure the projectile is properly seated. 5. Remove ramrod with attached cleaning & loading jag from the barrel. Cleaning 1. Thread the brass cleaning & loading jag onto a ramrod. 2. Place a cleaning patch over the end of the muzzle. 3. Place end of cleaning & loading jag on the patch. 4. Push the ramrod and cleaning patch down the entire length of the barrel. 5. Remove ramrod from the barrel with attached cleaning & loading jag and patch. 6. Repeat steps 2-5 until the barrel is clean and free of all powder residue and debris. ***Never attempt to clean a loaded firearm. Ensure the firearm is unloaded before cleaning.
The Muzzleloader Brass Cleaning and Loading Jag is all you need to make cleaning or loading your muzzleloader a breeze. The .54 caliber cleaning/loading jag comes with male and female 10-32 threads, that will fit most ramrods on the market. The Muzzle-Loaders™ brass cleaning jag secures snugly to the end of your ramrod, making cleaning the full length of your barrel easy and efficient. *Fits .54 Caliber Rifles & Pistols HOW TO USE: Loading 1. Thread the brass cleaning & loading jag onto a ramrod. 2. Place the brass cleaning & loading jag over the end of the projectile. 3. Push ramrod down the bore until the projectile contacts the powder charge. 4. Give ramrod a good tap to ensure the projectile is properly seated. 5. Remove ramrod with attached cleaning & loading jag from the barrel. Cleaning 1. Thread the brass cleaning & loading jag onto a ramrod. 2. Place a cleaning patch over the end of the muzzle. 3. Place end of cleaning & loading jag on the patch. 4. Push the ramrod and cleaning patch down the entire length of the barrel. 5. Remove ramrod from the barrel with attached cleaning & loading jag and patch. 6. Repeat steps 2-5 until the barrel is clean and free of all powder residue and debris. ***Never attempt to clean a loaded firearm. Ensure the firearm is unloaded before cleaning.