The PowerBelt™ SpeedClip is designed for faster reloading in the field. With the integrated clip, the SpeedClip will mount to any belt or sling, allowing for convenient and fast reloading. The PowerBelt™ SpeedClip features three integrated tubes, with holding the capacity of 3 pellets and a bullet. These tubes are optimized for pellets, but may also be used with loose powder. Another great feature of the SpeedClip is the integrated primer storage, for up to four 209 magnum primers. The PowerBelt™ SpeedClip is an essential for any muzzleloading hunter!
The PowerBelt™ SpeedClip is designed for faster reloading in the field. With the integrated clip, the SpeedClip will mount to any belt or sling, allowing for convenient and fast reloading. The PowerBelt™ SpeedClip features three integrated tubes, with holding the capacity of 3 pellets and a bullet. These tubes are optimized for pellets, but may also be used with loose powder. Another great feature of the SpeedClip is the integrated primer storage, for up to four 209 magnum primers. The PowerBelt™ SpeedClip is an essential for any muzzleloading hunter!
#html-body [data-pb-style=NG7KVYI]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}#html-body [data-pb-style=NG7KVYI],#html-body [data-pb-style=P3B6DY5],#html-body [data-pb-style=X2YT3SD]{border-style:none;border-width:1px;border-radius:0;margin:0;padding:0} The Muzzle-Loaders.com® Flex Speed Loaders contain everything you’ll need for two backup muzzleloader shots, all in a compact, easy-to-carry design. The durable Flex Loaders hold two loading tubes, each capable of accommodating a magnum projectile and charge. When a backup shot is needed, simply remove the air-tight silicone cap from the loading tube and load the bore pellets first, followed by the projectile. The Flex Loaders also feature lanyards for easy access and quick opening. These lanyards have a hole for attaching them to your possibilities bag or pouch. The Muzzle-Loaders.com® Flex Loaders are constructed from special silicone material that remains pliable even in the most frigid conditions. Loading in the field doesn’t get any easier than this. The Flex Loaders are designed for .50 Cal. or .45 Cal. bullets and are built to accept magnum charges of three Pyrodex® pellets with a bullet. How To Use: 1. First determine best performing pellets & bullet combination. 2. Load combo into the clear tubes (bullet tip toward the bottom), mark the tube 1/2” above the last pellet and cut the tube at this mark. Repeat for other tubes. 3. Pre-Load all tubes and insert the open (powder) end into the flex speed loader. 4. When ready to reload, simply remove one of the silicone caps from the top of the tube , being sure to cover the open end with your thumb to prevent spillage. Then place the open end of the tube over the muzzle of the rifle and dump the contents into the barrel, being careful to properly align the bullet with your fingers.
The Hornady ELD-X™ Muzzleloading Ramrod Tip is precisely engineered to perfectly fit over the tip of Hornady™ Bore Driver ELD-X muzzleloader bullets. To ensure proper loading and alignment of the bullet as it is pushed down the muzzle a properly fitted loading jag is an absolute necessity. Unlike universal loading jag tips this jag matches the ogive of the ELD-X Hornady® projectiles perfectly. Why does that matter? With a perfect ogive match, you are ensuring that the bullet and the ballistic tip are not damaged in any way during loading procedures. This ensures the bullet will perform as intended every time. If you are going to be using Hornady ELD-X muzzleloader bullets we highly recommend that you purchase one of these jags for both your bullet starter and ramrod to ensure proper loading and alignment. The all-brass construction of the Hornady ELD-X Loading Tip makes this jag perfectly safe for every muzzleloader barrel and will not scratch or damage the rifling. Additionally, the jag features 10/32 threads making it compatible with the vast majority of muzzleloading ramrods and bullet starters on the market today.
The Traditions™ 209 Capper tool is constructed of synthetic composite material making it rust and corrosion proof and allowing for slight flexibility for ease of use. The 209 capper tool features a capping end that allows for easy and fast loading of 209 primers into modern inline muzzleloader breech plugs. Additionally, the capper features 3 storage cutouts that allow for 3 spare 209 primers to be stored on the capper for rapid and convenient access. The capper also features a drilled hole to easily string the capper onto a lanyard so it can be kept at the ready. The ergonomic shape and design of the Traditions™ 209 Capper makes priming modern inline muzzleloaders fast, easy and comfortable. Be sure to gear up for your season with the Traditions 209 Capper tool.
Traditions™ Super Magnum Pellet Quick Loader is an all-in-one loader and starter. The quick loader holds a magnum charge of three 50-grain Pyrodex® pellets in one end and your bullet in the other. The loader features quick release tops that can be used as a capper: one for #11 caps and the other for musket caps. This 2 pack of Super Magnum Loaders features clear plastic construction, which allows for easy and convenient powder measurement.
The CVA™ VariFlame Capper & Extractor Tool is designed for all CVA Paramount muzzleloaders with a VariFlame ignition. The CVA™ Paramount Capper Tool allows for easy capping and removal of all large rifle primers. *Always use caution when loading a firearm
The CVA Primer Pod storage system holds up to 12 209 primers or variflame adapters. The foam insert can be removed revealing a latticed compartment underneath for additional storage of primers or variflame adapters. This system provides hunters with a water-resistant storage solution to keep your primers dry and ready for action in the field. No matter the weather conditions you need to have confidence your primers are going to work. The CVA Primer Pod can help you achieve that performance and peace of mind. For maximum quiet, it is recommended to only load up the foam and leave the hidden compartment empty to avoid rattling noises. ***Primers are NOT included with this product***
Traditions™ 5-in-1 Speed Loader is an all-in-one loader and starter. The 5-in-1 loader holds a magnum charge of three 50-grain Pyrodex® pellets in one end and your bullet in the other. The loader features quick release tops that can be used as a capper: one for #11 caps and the other for musket caps. This magnum 5-in-1 Loader features clear plastic construction, which allows for easy and convenient powder measurement. ***Always Use Caution When Loading A Firearm
The Traditions™ Straight Line Muzzleloader Percussion Capper is a great tool for shooters using #11 cap ignition rifles. The solid brass capper keeps it simple by holding #11 percussion caps ready for precise dispensing to the nipple of any rifle. The cappers rectangular tube eliminates problems with tipped and jammed caps. The spring-loaded capper has a capacity of (15) #11 caps, and makes for quick-easy loading in the field or at the range. **Always use caution when loading a firearm
Traditions™ Magnum Fast Loaders will handle any magnum load, pelletized or loose powder and bullets. The plastic fast loader is made for .50 caliber bullets and comes in a convenient package of three loaders. These fast loaders are a great way to pack your projectile and pre-measured powder. Each tube can hold up to 150 grains of loose or pelletized powder.
The Blackhorn™ 209 Powder Tubes are the simple solution for keeping your Blackhorn™ Powder at ready to load a powder charge quickly and effortlessly in the field. The Muzzleloader tubes hold up to 120 grains of powder per tube, and come with a 20-120 unit volumetric measurement on the side of the see-through, durable plastic tube to indicate how much powder you have yet to use. The Blackhorn™ 209 Tubes make loading your rifle or preparing your load quick and easy. These tubes are great for preparing loads in advance for follow-up shooting, or for speed loading during a match. The Blackhorn™ Tubes are made of heavy plastic and come in a pack of 6 or 20. The tubes will not crush with normal use and come with a tight-fitting lid, plus won’t discolor when stored with a load. To make certain you’re always prepared in the field or at the range, carry these solid Blackhorn™ 209 Tubes with you.
The Muzzle-Loaders Antler Pan Brush is a perfect accessory for flintlock shooters with a nice antler handle to make it more aesthetically pleasing. This is a simple flintlock shooters tool that is handy to keep on hand in your possibles bag or field bag. The antler handle makes for a nicer looking brush than the typical wire handled variation and allows for a more authentic feeling experience. This antler pan brush is hand crafted in the United States by October Country Muzzleloading.
The CVA® Anti-Static Loose Powder Field Funnel is simple, elegant and effective. This solid, one-piece plastic funnel allows for the proper loading of muzzleloader rifles that utilize a muzzle brake. The extended funnel stem keeps the powder flowing rapidly to ensure maximum reloading efficiency out in the field or at the range. This funnel is designed to work with .45 caliber and larger muzzleloaders.
The Traditions™ Loose Powder Fast Loader will handle any loose powder load up to 120 grains. The fast loader features graduations along the length of the tube in 10-grain increments for precise and consistent volumetric loads. Additionally, the loose powder fast loader features an air and watertight cap, ensuring the powder charge is kept in perfect condition no matter what the weather conditions are.
Traditions® Charge n' Load Speed Loader makes loading in the field a snap. The Charge n' Load will hold up to three (3) Pyrodex pellets as well as your favorite muzzleloader bullet. The Traditions Charge n' Load Speed Loader is an easy way to load your muzzleloader quickly. **Always use caution when loading a firearm
The Traditions™ Muzzleloader Field Capper is a great tool for shooters using #11 cap ignition rifles. The solid brass capper keeps it simple by holding #11 percussion caps ready for precise dispensing to the nipple of any rifle. The cappers rectangular tube eliminates problems with tipped and jammed caps. The field sized spring-loaded capper has a capacity of (10) #11 caps, and makes for quick-easy loading in the field or at the range. ***Always use caution when loading a firearm
The Muzzle-Loaders™ Magnetic Capper Tool is perfectly designed to make the capping and decapping of your primers easy and fast. The capper is designed to be used for capping 209 primers, and VariFlame™ adapters. Secondarily, the capper is designed to comfortably fit in the breech opening ensuring the magnetized end can quickly attach to the spent VariFlame™ adapter for easy removal and recharging. In addition to the magnetized capper end of the tool, the opposite side features a lanyard loop so you can easily attach the tool to a lanyard, on your pack, a D-ring or a retractor for rapid access while in the field. When it comes to operating in the field, the right gear is vital to get the job done. For hunters and shooters who use the Paramount or Paramount Pro rifle platform be sure to add the Magnetic Capper to your lineup.
Traditions™ 209 Quick Loaders are capable of holding a full magnum charge of three 50-grain black powder pellets or 150-grains, volumetrically measured, of loose powder. The quick loader is divided into two compartments allowing you to use either pelletized or loose powder in one end and placing the projectile of your choice in the other end. Each cap is equipped with a 209 capper pocket that can be used as a capper when loading the primer into the breech plug. For fast and convenient reloading of your muzzleloader Traditions™ 209 Quick Loaders will get the job done. ***Always Use Caution When Loading A Firearm
The Muzzle-Loaders™ Anti-Static Powder Funnel is simple, elegant and effective. This solid, one-piece non-static polymer funnel allows for the proper loading of muzzleloader rifles that utilize a muzzle brake. The extended funnel stem keeps the powder flowing rapidly to ensure maximum reloading efficiency out in the field or at the range. This funnel is designed to work with .45 caliber and larger muzzleloaders. We have tested this funnel with Blackhorn 209 and Pyrodex and can confirm it does not have any static cling on either type of powder.
The Paramount Blackhorn™ 209 Powder Tubes are the simple solution for keeping your Blackhorn™ Powder at ready to load a powder charge quickly and effortlessly in the field. The magnum powder tubes hold up to 150 grains of Blackhorn 209™ or other loose black powder per tube and come with a 20-150 grain unit volumetric measurement on the side of the see-through, durable plastic tube to indicate how much powder is in each tube. The Paramount Blackhorn™ 209 Tubes make loading your rifle or preparing your load quick and easy. These tubes are great for preparing loads in advance for follow-up shooting, or for speed loading during a match. The Blackhorn™ Tubes are made of heavy plastic and come in a pack of 3. The tubes will not crush with normal use and come with a tight-fitting lid, additionally, they won’t discolor when stored with a load. Gear up for your hunting season or competition shooting match with the Paramount BH209 loading tubes.
The Blackhorn™ 209 Powder Tubes are the simple solution for keeping your Blackhorn™ Powder at ready to load a powder charge quickly and effortlessly in the field. The Magnum Muzzleloader tubes hold up to 150 grains of powder per tube, and come with a 20-150 unit volumetric measurement on the side of the see-through, durable plastic tube to indicate how much powder you have yet to use. The Blackhorn™ 209 Tubes make loading your rifle or preparing your load quick and easy. These tubes are great for preparing loads in advance for follow-up shooting, or for speed loading during a match. The Blackhorn™ Tubes are made of heavy plastic and come in a pack of 10. The tubes will not crush with normal use and come with a tight-fitting lid, plus they won’t discolor when stored with a load. To make certain you’re always prepared in the field or at the range, carry these solid Blackhorn™ 209 Tubes with you.
The CVA™ Universal Speed Loader Pouch is designed for faster reloading in the field. With the integrated belt loop, the Loading Pouch will mount to any belt or sling, allowing for convenient and fast reloading. The CVA™ Universal Speed Loader Pouch is essential for any muzzleloading hunter!
The CVA™ Variflame™ Magnetic Capper Tool is perfectly designed to make the capping and decapping of the Variflame adapters easy and fast. The capper is designed to comfortably fit in the breech opening ensuring the magnetized end can quickly attach to the spent Variflame adapter for easy removal and recharging. In addition to the magnetized capper end of the tool, the opposite side features a lanyard loop so you can easily attach the tool to a lanyard, on your pack, a D-ring or retractor for rapid access while in the field. When it comes to operating in the field, the right gear is vital to get the job done. For hunters and shooters who use the Paramount or Paramount Pro rifle platform be sure to add the Variflame adapter to your lineup.