DNZ

The DNZ®, Knight™ Muzzleloader Rifles Scope Mount comes in medium or high base, in matte black order silver color. These DNZ Mounts are custom-made to fit Knight™ rifles 2011 or newer. Machined from a solid block of top-grade billet aluminum, the mount aligns perfectly with the rifle’s receiver, eliminating any seams between the rifle and scope. These scope mounts are engineered to absorb shock and withstand temperature extremes better than steel mounts, and at a fraction of the weight. The DNZ® one-piece scope mount comes in black or camo, contains no moving parts and are 67% lighter than comparable one-piece scope mounts. DNZ® Scope Mounts come with four times the threads, with precision, socket-head cap screws for absolute strength and security. The mounting specs measure outside-to-outside rings of 4.29″ and rings are .63″ wide. The 4 hole-to-hole spacing dimensions are .5″, .5″, 2.18" and .5″ respectively. The mounting height of the mount from top of barrel to centerline of scope tube is as follows; medium 1.13″, and high 1.25″. DNZ® mounts come with all mounting screws needed to attach mount to rifle. Base screws are 6-48 X 1/4″ long, rings screws are 6-40 X 5/8″ long. The CVA™ base screws take a 7/64” Allen Wrench and ring screws take a 7/64” Allen Wrench.

The DNZ®, CVA™ Muzzleloader Rifle Scope, Low to Extra High Base Mounts are custom-made to fit CVA™ rifles 2010 or newer. Machined from a solid block of top-grade billet aluminum, the mount aligns perfectly with the rifle’s receiver, eliminating any seams between the rifle and scope. These scope mounts are engineered to absorb shock and withstand temperature extremes better than steel mounts, and at a fraction of the weight. The DNZ® one-piece scope mount comes in black or camo, contains no moving parts and are 67% lighter than comparable one-piece scope mounts. DNZ® Scope Mounts come with four times the threads, with precision, socket-head cap screws for absolute strength and security. The mounting specs measure outside-to-outside rings of 3.92″ and rings are .63″ wide. The 4 hole-to-hole spacing dimensions are .86″, 79″, and .86″ respectively. The mounting height of the mount from top of barrel to centerline of scope tube is as follows; low 1.00″, medium 1.13″, and high 1.25″. DNZ® mounts come with all mounting screws needed to attach mount to rifle. Base screws are 8-40 x ¼” long, rings screws are 6-40 X 5/8” long. The CVA™ base screws take a 9/64” Allen Wrench and ring screws take a 7/64” Allen Wrench.

These DNZ® CVA™ Medium or High Base 30 mm Rifle Scope Mount is custom-made to fit CVA Muzzleloaders 2010 or newer. Machined from a solid block of top-grade billet aluminum, the mount aligns perfectly with the rifle’s receiver, eliminating any seams between the rifle and scope. These scope mounts are engineered to absorb shock and withstand temperature extremes better than steel mounts, and at a fraction of the weight. The DNZ® one-piece scope mount comes in black matte, contains no moving parts and are 67% lighter than comparable one-piece scope mounts. The DNZ® Scope Mounts come with four times the threads, with precision, socket-head cap screws for absolute strength and security. The mounting specs measure outside-to-outside rings of 3.92″ and rings are .63″ wide. The 4 hole-to-hole spacing dimensions are .86″, 79″, and .86″ respectively. The mounting height of the mount from top of barrel to centerline of scope tube is as follows; low 1.00″, medium 1.13″, and high 1.25″. DNZ® mounts come with all mounting screws needed to attach mount to rifle. Base screws are 8-40 x ¼” long, rings screws are 6-40 X 5/5” long. The CVA™ base screws take a 9/64” Allen Wrench and ring screws take a 7/64” Allen Wrench.

The DNZ® CVA™ Scope Mounts for 2009 & older models. The mounts come in either Low, Medium and High Base and are custom-made to fit CVA™ rifles 2009 and older. Machined from a solid block of top-grade billet aluminum, the mount aligns perfectly with the rifle’s receiver, eliminating any seams between the rifle and scope. These scope mounts are engineered to absorb shock and withstand temperature extremes better than steel mounts, and at a fraction of the weight. The DNZ® one-piece scope mount comes in black or camo, contains no moving parts and are 67% lighter than comparable one-piece scope mounts. DNZ® Scope Mounts come with four times the threads, with precision, socket-head cap screws for absolute strength and security. These mounts fir CVA Black Powder Rifles (2009 and older break open barrels only): Mounts DO NOT fit bolt guns. Base screws are 8-40 X 1/4″ long. Ring screws are 6-40 X 5/8″ long. Base screws use a 9/64″ Allen wrench and ring screws use a 7/64″ Allen wrench. Outside to outside of rings is 3.92″. Rings are .63″ wide. 4 Hole to hole spacing dimensions are .86″, 2.36″, .86″. Height of mounts from top of barrel to centerline of scope tube is – low 1.00″, medium 1.13″, and high 1.25″.

These DNZ® Products Muzzleloader Rifle Scope Mount with Medium or High Base are custom-made to fit Thompson Center™ rifles, specifically T/C Encore, Omega, Pro Hunter, Pro Hunter FX, Triumph and Impact. Machined from a solid block of top-grade billet aluminum, the mount aligns perfectly with the rifle’s receiver, eliminating any seams between the rifle and scope. These scope mounts are engineered to absorb shock and withstand temperature extremes better than steel mounts, and at a fraction of the weight. The DNZ® one-inch, one-piece scope mount comes in black or camo, contains no moving parts and are 67% lighter than comparable one-piece scope mounts. DNZ® Scope Mounts come with four times the threads, with precision, socket-head cap screws for absolute strength and security. The mounting specs measure outside to outside rings of 4.55″. The standard rings are .63″ wide and have 2 ring screws per ring. Hole to hole spacing dimensions are .31″, .84″, .31″. The height of the scope mounts from the top of receiver to centerline of the scope tube is; low 1.00″, medium 1.13″, high 1.25″ and X High 1.38″. The base screws are 6-48 X 1/4″ long and the scope ring screws are 6-40 X 5/8″ long. Both screw sets use a 7/64″ Allen Wrench.

These DNZ® Traditions Muzzleloader Medium or High Base Rifle Scope Mounts are custom-made to fit Traditions™ Rifles. Machined from a solid block of top-grade billet aluminum, the mount aligns perfectly with the rifle’s receiver, eliminating any seams between the rifle and scope. These scope mounts are engineered to absorb shock and withstand temperature extremes better than steel mounts, and at a fraction of the weight. The DNZ® one-piece scope mount comes in black or camo, contains no moving parts and are 67% lighter than comparable one-piece scope mounts. DNZ® Scope Mounts come with with four times the threads, with precision, socket-head cap screws for absolute strength and security. The mounting specs measure outside-to-outside rings of 3.92″ and rings are .63″ wide. The 4 hole-to-hole spacing dimensions are .86″, 79″, and .86″ respectively. The mounting height of the mount from top of barrel to centerline of scope tube is as follows; low 1.00″, medium 1.13″, and high 1.25″. DNZ® mounts come with all mounting screws needed to attach mount to rifle. Base screws are 8-40 x ¼” long, rings screws are 6-40 X 58” long. The CVA™ base screws take a 9/64” Allen Wrench and ring screws take a 7/64” Allen Wrench.